Accessories

Handy and affordable, this tool makes it easy to get a clean cut every time. - Securely holds hose while cutting - Replaceable blade - Metal construction holds up to frequent use

- Proper belt tension is critical to maintain optimum drive operation (low tension causes belt to skip on teeth, high tension causes excessive wear on belts, cogs and sprockets) - Tool gauges proper tension using a visual red/green indicator - It is recommended to rotate the drive and recheck tension several times around circumference of belt

Park Tool's Bottom Bracket Bearing Tool Set removes and installs (with a bearing press which is sold separately) BB86, BB90, BB92 and Press Fit bottom brackets from Shimano, Race Face, SRAM and others that use a nominal 24mm-diameter spindle. This tool has a bearing remover that fits inside the bottom bracket shell and into the bearing so the bearings can be tapped out of the frame with a hammer. The set also includes two bushings that you use in conjunction with a bearing press for precision bearing installation (bearing press sold separately).

Clear garage clutter Easy parking solution for any bike. Features - Original Design: Rolling features allows for easy storage & transport - Secure: Wide base with triangulated arms holds bikes firmly - Fully Adjustable: Infinitely adjustable to hold any wheel size - Quick Assembly: No tools assembly - Construction: Industrial-grade powder-coated steel & custom arm covers - Dimensions: 22 x 15 x 17-inches / 560 x 380 x 430 mm

This is a replacement hose for your Lezyne Micro Floor Digital Drive pump. It offers an integrated, highly advanced, inline digital gauge and ABS Flip-Thread chuck.

Park Tool's TS-RK is a complete rebuild kit for the TS-2 truing stand. It is complete with the most commonly replaced small parts and the instructions needed to get your stand back into top working condition. In addition to making the stand more accurate and reliable, once installed, the new parts also allow the stand to be readjusted much more easily, should it be thrown out of adjustment. This is a great addition to the older TS-2 stands. If your stand has silver-colored shaft collars, upgrade with the TS-RK. The TS-RK includes the following: • 1 - #211S Main Shaft • 4 - #749-1 Bearing Washer • 2 - #748-1 Needle Bearing • 2 - #209-2 Shaft Adjusting Collar • 1 - #229 Spring • 4 - #232-2 Split Nylon Bushing • 2 - #235-2 Split Nylon Bushing • 1 - #222-SR Right Caliper Spring • 1 - #222-SL Left Caliper Spring • 1 - Set of Installation and Adjustment Instructions

Monarch/Deluxe IFP Height Tool

Rear Shock IFP Height Tool 19mmx70mm (for setting IFP Height) - SIDLuxe A1+ (2020+)

AMPP400 Safety first, the AMPP 400 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. Viz 150—Safety first, the AMPP500 comes with maximum side visibility, securely held in place with our adjustable FlexTight bracket. - Rechargeable headlight (400 lm) - Wide beam with OptiCube lens technology - Excellent side visibility - Low battery indicator (Illuminates in red with less than 20% battery remaining) - USB rechargeable (Micro-USB cable included) - Mode memory function - Four light modes (High / Low / Daytime HyperConstant / Flashing) - Turns on High mode with double-click of power button - FlexTight bracket - Improved release button has made it easy to remove the light unit from the bracket - Helmet mount and center fork bracket (optional) Run Times - High (400 lm): 2 hours - Low (200 lm): 4 hours - Daytime Hyper-Constant (400/200 lm): 6 hours - Flashing (200 lm): 60 hours ViZ150 Compact, bright, and versatile, the ViZ150 stands out with high visibility from OptiCube lens technology and Daytime Hyperflash mode in an economical package. Run Times - Constant (20 lm): 5 hours - Flashing (15 lm): 70 hours - Group Ride (50 lm): 11 hours - Daytime Hyperflash (150 lm): 15 hours

Engineered for road cyclists, the sleek Dash™ 520 elevates your adrenaline rushes to another level with an aggressively powerful 520 lumens to pierce through the night. Its highly efficient lens enables an extra-wide, long-range beam to maximize your line of sight. Beyond its exceptional night capabilities, an attention grabbing array of quad Daytime Running Lights (DRL) makes you stand out in broad daylight. Every bit the road cyclist’s light, it uses a low-profile flexible mount designed for most handlebars including aerobars. Patent pending. - Powerful 520 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® - DayLightning® - Quad LED Steady - Quad LED Flashing) - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your way at night - DayLightning® mode emits lightning-like flashes to highlight your presence in the brightest of daytime hours - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 79 grams - Side illumination ports highlight your presence to nearby motorists - Versatite™ flexible mount conveniently attaches to most handlebars including aero bars Specs: - LED OUTPUT: 520 lumens - TOTAL MODES: 8 RUN TIMES: - Low: 10 hrs - Medium: 3 hrs - High: 1:30 hrs - Boost: 1 hrs - SteadyPulse®: 3 hrs - Quad LED Steady: 8:30 hrs - Quad LED Flash: 63 hrs - DayLightning®: 9 hrs - CHARGE TIME: 3 hrs - MOUNTING: Flexible Handlebar Mount - BATTERY: Built-in Li-ion - SYSTEM WEIGHT: 79g Patent pending. *Features and specs are subject to change without notice.

Made for road cyclists and commuters, the Dice combo provides powerful vision and visibility in the smallest package possible. Fire up the night with the Dice™ headlight's incredible 150 lumens to see clear and far ahead, and stand out in broad daylight with intense lightning-like flashes. To cover your rear, the Dice™ 50 tail light stands out with its powerful and extra-wide 50 lumen flashes. Both lights sense day and night, automatically switching to the optimal flashing mode to maximize your visual presence at all times. Get the most out of your ride with the performance and features packed into this combo light set. Patent pending. Dice™ HL 150 USB Headlight: - Powerful 150 lumen output with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash) - DayLightning® mode emits powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode alerts night time motorists with pulses while constantly lighting your path - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most handlebars including aero bars Dice™ TL 50 USB Tail Light: - Powerful 50 lumen flashes with 8 light modes - Built-in 24/7 Safety Technology® gives you a powerful selection of night and day modes (Boost - High - Medium - Low - SteadyPulse® Low - SteadyPulse® High - DayLightning® Triple Flash - DayLightning® Single Flash) - Flashing modes emit powerful lightning-like flashes to highlight your presence in broad daylight - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Enhanced Cycling Optics™ (ECO) expands your visibility with an extra-wide and long-range beam - USB rechargeable Li-ion battery - Low battery indicator - Light mode memory saves the mode you're in before the light is turned off - Low profile, water-resistant design only weighs 30 grams - Flexible mount conveniently attaches to most seat posts including aero styles Patent pending. *Features and specs are subject to change without notice.

250 lumens packed into an unbelievably compact form, the all-new Hypershot 250 is the latest and greatest from the originators of the most powerful line of LED bike tail lights. This powerful dual LED tail light puts out ultra-bright 250 lumen flashes in an extra-wide and long-range beam pattern that makes cyclists stand out both day and night. The 2 button design on the Hypershot lets cyclists control the speed of each flash mode and the brightness of the steady mode to their preference. And with 7 unique lighting modes and a run time range of 2 to 200 hours (yes, really), you won’t go unnoticed. (patent pending) - Powerful 250 lumen flashes to be seen day and night - Unique 2-button design lets you adjust the speed of each flash mode and the brightness of the Steady mode - Dual LED optics throws a long-range, extra-wide beam - Daytime visible flashes make you stand out on busy streets - 7 lighting modes for day and night use (Steady - Zoom - SteadyPulse® - Bzzz Flash - Triple Flash - DayLightning® Flash - Random Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keeps them alert at night - DayLightning® flash mode bursts lightning-like flashes to make you stand out in broad daylight on busy streets - Zoom mode signals those around you with gentle changes in brightness - All-new Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Hard seat post mount and seat stay mount securely attaches onto seat posts and seat stays - Light mode memory saves the mode you're in before the light is turned off - Durable and weighs only 60 grams - IP64 water-resistant for use in all weather conditions - USB rechargeable with 2 to 200 hours of run time and 3 hours fast charging - Low battery indicator alerts you when a charge is needed Patent pending. *Features and specs are subject to change without notice.

The world’s first CO2 inflator with tire gauge provides tire-inflation and tire-pressure measurement. The angled head fits Presta and Schrader valves and a special feature allows the user to adjust the flow while filling the tire. Dual-end design allows for one-cartridge storage. - CO2 inflator that features a gauge as well - Flow is adjustable using special feature - Compatible with both Presta and Schrader valves - Presta/Schrader with integrated dust cap, Push to inflate - Gauge: Reads 160 psi / 11 bar, 1-1/2” analog - Engineering-grade polymer - Weight: 45g /1.59 oz - Size: 6.5 x 5.2 x 3.3 cm / 2.5” x 2” x 1.3” - Accepts threaded cartridges - CO2 cartridges sold separately

Topeak's DeFender XC1 front fender offers durable rain and mud protection for your 26-inch wheeled bike. It's incredibly light and easy-to-use, too. Extra clearance makes it perfect for long-travel forks, and a unique design allow it to disengage if an obstruction enters the wheel. The quick-release fork attachment allows the DeFender to be installed and removed in seconds and the angle is adjustable for the perfect fit.

- Integrated top plate for quick-mount MTX 1.0, 2.0, and RX trunk bags - Integrated fender top - 6061 T6 alloy construction - To be mounted on bikes with disc brakes - 625g - 55lb weight capacity

- A multi-tool that includes a tubeless tire repair kit - 18 individual tools 22.5345mm hexes T25 Torx wrench stainless steel reamer knife plug tool and air stop - Also includes three 5mm thick tire plugs and integrated storage compartment - Vanadium s

Chain locks have always enjoyed great popularity among experienced cyclists. This is not surprising, as they have some unique properties. Just like the Catena 6806. For one thing, the lock is lightweight and easy to transport. It can be stored folded in a bag or alternatively wrapped around the seat post of the bike. On the other hand, it is so flexible that it is possible to chain your bike to almost any location without any problems. The Catena 6806 can still fit in even in the tightest of spaces and can be used whenever the bike is used. Technology: - 6mm thick square chain with textile sleeve that prevents damage to paintwork - The chain is made of specially hardened steel Operation and use: - Good protection at low theft risk - Recommended for securing entry-level bicycles

Carry everything Increase hauling capacity and add versatility to your bike with the BackRack Deluxe MIK. It has an additional rail that's compatible with trunk bags and panniers, an MIK system that offers secure mounting of compatible trunk bags, and threaded accessory eyelets for extra functionality and easy light installation. This rack is designed for proper weight distribution and bag positioning on larger size bikes. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags, and panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware - Additional side stays allow for mounting of both trunk and pannier bags - Max weight capacity 25kg (55 lbs.) Specifications - Size: 18-22" (54-62cm) - Rack type: Rear racks - Material: Aluminum

Big storage for smaller frames Increase hauling capacity and add versatility to your bike with the BackRack Deluxe MIK. It has an additional rail that's compatible with trunk bags and panniers, an MIK system that offers secure mounting of compatible trunk bags, and threaded accessory eyelets for extra functionality and easy light installation. This rack is designed for proper weight distribution and bag positioning on smaller size bikes. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags, and panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware - Additional side stays allow for mounting of both trunk and pannier bags - Max weight capacity 25kg (55 lbs.) Specifications - Size: 13-18" (33-46cm) - Rack type: Rear racks - Material: Aluminum

High-quality L-keys for recessed TORX screws. Comes with a holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screws on the tool at both ends. The BlackLaser surface treatment provides outstanding corrosion protection and a long service life. Available in a practical clip fastener, whose wear-free material provides secure storage for the L-keys and enables simple removal. - Holding function for recessed TORX screws - BlackLaser surface treatment for corrosion resistance - "Take-it-easy" tool finder: color coding by size - Color coded, easy-to-grip plastic sleeve, even at low temperatures - Includes: 1x TX 8x76 mm, 1x TX 9x79 mm, 1x TX 10x85 mm, 1x TX 15x90 mm, 1x TX 20x96 mm, 1x TX 25x104 mm, 1x TX 27x112 mm, 1x TX 30x122 mm, 1x TX 40x132 mm

Guide tool for starting nipples in deep/aero rims.

7-piece tapping drill bit set in a stable plastic box for the cutting of metric threads. The hexagonal bit shaft ensures very good power transfer. The finely-tuned material elasticity makes for great durability. Perfect chip removal and a low tilt risk. The Rapidaptor ensures rapid bit change without any extra tools. - Ideal for mobile repair and assembly work - Rapidaptor holder for rapid bit change - 1/4" drive suitable for power screwdrivers - Rapidaptor universal holder, non-magnetic, and tapping drill bits with 1/4" drive - In practical and robust plastic box

DT Swiss Wheel bags

Suspension maintenance and tuning require tools designed for a precise fit. The SKT-6 from Park Tools is a shop-quality set of six flat-faced sockets designed for use with common suspension fork fittings. Ideal for use with Park Tool Torque Wrenches, the 3/8-inch drive sockets are forged from tough chrome vanadium steel and chrome plated for lasting durability. - 24, 26, 27, 28, 30, 32mm flat-faced sockets - All sockets are 3/8" drive - Note: 27mm socket is tapered for better access on Suntour suspension forks

Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty

Hayes Pro bleed kits include dual syringes and high quality fittings for precise, repeatable bleeds. D.O.T. Brake Fluid Dual Syringe Pro Bleed Kit - Includes 4oz of high performance Hayes DOT 4 brake fluid - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes DOT 4 brakes - Reusable plastic container with locking lid Venom Mineral Oil Dual Syringe Pro Bleed Kit - Includes 2oz of high performance Hayes Venom mineral oil - Quick connect fittings and dual syringes for an efficient, precise bleed - Bleed fittings for Hayes Venom mineral oil brakes - Reusable plastic container with locking lid

The 1 Litre City Stem Bag fits any folding bicycle. Made from tough waterproof fabrics, it provides a simple solution for carrying a water bottle, snacks, or other accessories. The bag moves with the stem and does not impact the folding mechanism of the bike. Handmade in our Yorkshire workshop, all bags are finished with the classic Restrap label, and made from vegan-friendly PU. Weight - 96g Capacity - 1L - Bags designed specifically for use on folding bicycles - 100% handmade in Yorkshire England from vegan-friendly PU - Third-party online sales are strictly prohibited by the manufacturer All Restrap products carry a lifetime guarantee to be free of defects in materials and workmanship. We stand by our products and will cover the cost to repair or replace any defective product.

Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm

- Attaches to air compressor to inflate tires in seconds - Designed with a variable rate trigger and a large, easy to read gauge - Spin-on Presta head with pressure release option and USA-made hose are included with Prestaflator - Prestaflator PLUS includes Schrader head and blower tip - Attachments are 6061-T6 alloy

- Aids in the quick change of oil-bath fluid in RockShox Totem forks and for servicing/bleeding XX-Series Xloc hydraulic remote systems (Not for reverb seatposts) - Includes: Speed lube syringe+hose, adapter fittings/O-rings, And port-access wrench