In-Store Catalog

Technical gaiters made specifically for fatbiking. Built with a durable and wind resistant 600d poly outer shell, 100g Primaloft ECO insulation and knee-high construction, Bergraven gaiters keep snow out of your boots and insulate your shins. A super durable aramid stretch panel on the medial side protects against contact with crank arms and chain-rings. The toe hook mates up perfectly with both versions of the award-winning Wölvhammer boot to ensure a secure fit in extreme winter riding conditions.

Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.

Improve the performance of your tandem drivetrain with fresh stainless cables coated in smooth Teflon for friction-free shifting. Longer than a standard shift cable, its length will get the job done for any tandem. Key features: - Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - Length: 3000mm

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

ViscoSet offers viscous damping to make bicycles safer by inhibiting the uncontrolled steering oscillation known as speed wobble. "Speed wobble" or "head shake" are vibrations that start small and get worse due to harmonics. This frightening shimmy can affect the handling of any bicycle under certain conditions and is the result of many different factors. - Interlok spacer compatible - Fully face sealed crown race - Dependable black-oxide, sealed cartridge bearings - Pre-Greased cartridge, no re-grease needed

- Battery tail lamp with reflector for rear rack - Compatible with 50mm, 80mm and 19mm (center mount) - Waterproof construct IPX4 - Built-in wide angle reflectors - Meets StVZO, RKF and Danish lamp standards - Meets StVZO Z, BS, UN IVA, UN IA and CPSC reflector standards - Low battery indicator - Tool-free battery replacement

Race it hard or just head off the beaten path. The Strada Bianca wraps Challenge's proven herringbone tread pattern further around a large volume casing and adds a gravel specific construction to take you comfortably over less-than-perfect surfaces. This is your tire for rough roads, packed dirt, and most gravel surfaces. This clincher with 120TPI nylon casing provides both performance and durability. This tire includes PPS, a Puncture Protection System placed between the tread and casing to increase resistance to punctures.

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

The Wooleator is a thin, merino wool version of the original favorite Aireator. Available in a 3" cuff. - Content: 61% Merino Wool, 37% Nylon, 2% Lycra - Weight: 1.6oz / 0.1lb - Care: Machine wash cool. Tumble dry low or hang dry. No bleach, softeners, or harsh detergents.

Learn From the Bike Repair Experts! Use coupon code "FREEREPAIRCLASS" for free registration. You will still need to enter credit card information at checkout but you will not be charged. Bicycles are complex machines with many moving parts, learning to maintain them is a daunting task. Our trained mechanics can teach everything from cleaning and lubricating your bike to replacing drivetrain components. Classes are approximately one hour in length and may be held outside of regular business hours. Classes are limited to ten attendees and are filled in a first-come, first-served basis. Please use our chat feature if you have any questions prior to attending! Please choose "Events & Classes: No Physical Pick Up Required" under Shipping & Pickup Options. The store location will be in the description of the class.

Professional hitch rack assembly. Please allow 24-72 hours for assembly. Contact customer service with any questions at customer.service@freewheelbike.com

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Garmin computers including Garmin 1040 - CNC machined 6016-T6 aluminum - Weight: 41g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

- For Integrated Handlebar (one piece) bar/stem - Pro-level mount with -7 degree articulation for custom computer positioning - Lifetime warranty. CNC Machined. Black Anodized - GARMIN approved replaceable computer insert protects computer tabs - Combo- Computer and GoPro style camera/light compatible - M5 hardware included. If a smaller bolt required, use an 8.4mm washer to ensure a secure fit. - Made in House. Boise, Idaho USA

- CNC Machined Aluminum - Combo Compatible (K13-580 adapter sold separately) - GARMIN approved replaceable computer insert protects computer tabs - Anodized Black with laser etched logos - Payload Capacity: Top 123g / Bottom 242g with combo adapter - Weight- 50g Compatibility: - All Garmin Cycling Computers - Combo (GoPro-style light/camera interface) adapter compatible (K13-580-BLK sold separately)

- Direct mounting for an aero cockpit - Strongest platform for your cycling computer and light or camera - Compatible: Future, Venge, Tarmac stems - Fits all Wahoo computers including Wahoo Roam - CNC machined 6016-T6 aluminum - Weight: 54g - One bolt Specialized SL& stem face plate mounting system - Includes mounting bolt and TNut - Lifetime Warranty - Made in Boise, Idaho USA

Saddle clamp heads and lowers for KS Dropper posts.

Kenda has jumped into fat bikes with the lightest fat tire available. The 120 tpi Pro version weighs in at 835 +/- 42 grams in a 4" width. Also available in a 4.5" width and 60 tpi. A tread pattern similar to the Nevegal and based on the Millville 2 motocross tire offers low rolling resistance while still gripping well in corners. Wire bead on the 60 tpi version, folding bead on the Pro 120 TPI with a dual compound tread on top.

- LEV has always represented the latest technology but is already a classic among top contending dropper posts. - With myriad of firsts to its name; first hydraulic dropper to offer zero cable movement, first dropper to win a UCI World XC Eliminator event and first in countless enduros, magazine tests and customer satisfaction polls, LEV IS the first dropper seatpost to outperform itself.

- LEV INTEGRA'S internally routed cable significantly cleans up the look of your bike. - With shifter cables, brake lines and lock out cables clamped and zip tied to your carbon fiber piece of art, mountain bike frames have begun to look like an IT guy's fantasy. - Clear the clutter while benefiting from legendary LEV technology – now available in 175mm travel.

- Eten-I rounds out the lower end of the KS internally routed dropper post spectrum with a post that is perfect for new riders just getting used to the idea of on-the-fly seat height adjustment or more experienced riders looking for a value-priced solution. - Eten-I uses the same head and cartridge as the Eten Remote but moves the cable interface to the bottom of the post for compatibility with frames accommodating internally routed cables.

- Creates a dry ceramic coating for increased durability and performance in dry condition - Excels in dry and dusty conditions - Biodegradable - Integral UV tracer dye and UV torch to aid accurate application and ensure total protection

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

RS RANGE EXTENDER KIT FOR RISE M MODELS Our RS Range Extender mounts to the Rise in seconds and offers a flexible way to add extra range to your rides. CHARACTERISTICS Compatibility Compatible with Rise M Models. Go Further Our RS Range Extender gives you another 252 Wh (70%) offering a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode. Secure Mounting Using our patent pending design, the range extender is securely held in the bottle cage. The cable from the range extender to the standard charging point fits securely and quickly and won't interfere with the pedals. Flexible The RS Range Extender Cage is compatible with water bottles. Our patent pending design, is the first high capacity range extender of over 250 wh, that can be replaced with a standard water bottle in just a second. DESCRIPTION Our RS Range Extender gives you another 252 Wh (70%) for those extra long rides. Adding the RS Range Extender to the Rise gives a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode. SPECIFICATIONS CAPACITY: 252 Wh WEIGHT: 1.4 Kg 70% extr autonomy BOX CONTENTS RS Range Extender Bottle Mount and screws Cable connection to the Rise charging point

Offering finely tuned trail protection, this trail and enduro mountain bike helmet gives exceptional coverage and features POC's innovative, patent-pending technology to minimize neck injury. Built to ride, all day. Features: - SPIN technology (Shearing Pad INside)—our patent-pending silicone-pad-technology system - Fully wrapped unibody shell to enhance durability and structural integrity - 360° size-adjustment system for the most precise and secure fit - Breakaway visor - Lightweight and well-ventilated Breakaway visor - The novel breakaway visor will snap off the helmet in an impact, thereby minimizing the impact forces that are transmitted to the neck. - The lightweight, well-ventilated Axion SPIN has extended protection zones around the temples and the back of the head for extra coverage where it is most needed.

Park Tool's Pedal Wrench Crow Foot is used with any 3/8” drive torque wrench to verify pedals are torqued to the correct spec. The TWB-15 is laser cut, heat treated and plated for long life.

This lightweight skirt features a snap-out cycling liner for versatility and comfort. It’s designed to hug the hips and stay in place rather than flap open on the bike. The waist is cut high in the back for coverage while we cut low across the stomach for comfort on the bike. It includes our comfortable and highly breathable Women’s SELECT Escape 1:1 chamois. - Skirt made with soft, lightweight, and high stretch SELECT Transfer fabric - Flattering wide waistband with encased elastic for superior comfort - Front hand pockets - Removable liner easily snaps in/out - Features soft stretch mesh and SELECT Transfer fabric for great hold and breathability - Blended thickness Women’s SELECT Escape 1:1 Chamois for chafe-free comfort - BioViz reflective elements for low-light visibility - Skirt: 15.25” length at center front (size M) - Liner: 6” inseam length (size M) - Main Body: 78% polyester, 22% elastane - Other: 95% nylon, 5% elastane - Made in Vietnam

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it. - Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force - No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant - Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance - Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

- Comfortable ride - Classic colors

- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE close - Inner-plate treated with SHIMANO's ultra-low friction surface treatment “SIL-TEC” (inner plate) - Same durability as current 10-speed chain BENEFIT close - System engineered drivetrain component for optimal power transfer - Smooth and precise front and rear shifting - Directional chain - Weight: 257g (114 Link)

- Width: 5.8 mm - Drivetrain Speeds: 11 - Color: Silver - Reusable: No

QUICK-LINK FEATURE - Tool-free assembly (possible) - Non-reusable - TL-CN10 BENEFIT - Easy connect - Compatible with current 11-speed chains - Quick assembly tool

- Wears and functions like other links on the chain - SIL-TEC surface treatment - Tool free installation possible - TL-CN10 is available as SM-CN900-11 - Single use

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

SHIMANO DEORE - 126 links for HG 12-SPEED - MTB Chain The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings. - Proprietary design ensures smooth shifting and strength - Extended inner plate improves chain engagement and retention - Shorter shift times and less pedaling shock - Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings

Shimano CN-HG71 6/7/8-Speed Chains - 8-speed MTB chain meets durability requirements for e-bike use - Designed for precise Hyperdrive SIS and Dual SIS Index shifting - Includes chain and chain connection pin, or quick link - Links: 116

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Maximum cog size: 34t - Total capacity: 43t

Enjoy quality and reliability with the Shimano Tourney 6/7-speed rear derailleur. It makes use of Shimano SIS, HyperGlide, and Double Servo technologies for smooth, accurate shifts. - Wheel-type cable guide - Maximum cog size: 34t - Total capacity: 43t

Shimano's Ultegra 10-speed Chain offers crisp shifting and excellent durability. Smooth, precise shifts come courtesy of the meticulously engineered inner and outer plate chamfers that are specifically designed to accommodate the unique requirements of a moving chain. And, the plates are perforated to trim precious grams. - Weight: 267g

Shimano Rear Derailleur Pulley Assemblies

Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t

CN-HG701-11 Super Narrow HG-X11 Chain (11-speed) FEATURE - Directional 11-speed chain - More efficient and silent, less maintenance - MTB, Road, E-BIKE 11-speed compatible - Reinforced chain for E-BIKE use BENEFIT - Smooth and reliable shifting performance - Weight: 257g (116 Links)

- 10-speed compatible - Shimano XT - 116 links

The Shimano Deore XT CN-M8100 12-speed chain is optimized for use with the Deore XT M8100 MTB drivetrain system. - HYPERGLIDE+ technology dedicated chain delivers greater chain retention, improved shifting efficiency, and smoother transmission over rough terrain - Extended inner plate improves chain engagement - Reduced shift times and pedaling shock - Includes Non-reusable Shimano Quick-Link (SM-CN910-12) - Links (links): 126 - Color: Silver - Drivetrain Speeds: 12 - Weight: 252 g

- 9-speed compatible - XT/Ultegra - 116 links

Super Narrow SIL-TEC HG-X11 Chain (11-speed) FEATURE - Rear drive Smooth driving without noise - Front drive Preserve chain security at cross chainline - Front & Rear Shift Smooth and reliable shifting BENEFIT - HG-X11 special asymmetric plate design for 11-speed - Weight: 247g (114Link) - SIL-TEC on Plate/Roller - Hollow pin - Weight: 247g (114Link)

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

-Material: Nylon -Wheel Size: 27.5+ -Width: 60 -Rim Strip Width (mm): 60 -Tire Diameter: 27" -Adhesive: No

- Fits 3-piece crank set - Includes right and left cup, lockring and bearings - English type - Shell: 68/73mm - Cup Material: Steel - Weight: 123 grams

- Dual pivot caliper brake - Melt forged aluminum arms - Quick release mechanism - Dimension : 39-52mm - Designed for 28C tire

This pedal set is perfect for the rider that needs ankle support in a completely secure pedal. It features a complete foot platform with a solid heel support. It also features 2 oversize straps with reflective strip and stainless steel ringlets that allow for a strong yet comfortable fit. A counterbalance on the bottom also assures the pedal will always remain upright for easier entry and exit. Perfect for special needs and motor control issues. Sold as a set of two. --Note: This pedal is not compatible with our Tandem Pro in the stoker position. The Tandem Pro captain position can utilize these pedals. - Replaces standard pedal - Counter-weighted so that the pedal is always in the same orientation - Reflective accents for visibility in low light conditions - One size fits most: for really small feet, consider our Pedal Platform w/straps kit

The Seat Extender will allow for taller customers to now enjoy any TerraTrike that features the two-position fixed seat mount. - Heavy duty chromoly construction - Durable black powder coated finish - Use of the Seat Extender limits the weight capacity of any TerraTrike to 320 lbs. - Use of the Seat Extender will slightly reduce the foldability of the Traveler and may cause damage to the paint and frame.

Domane SLR 6 AXS is an ultralight endurance road bike with premium parts made for a fast, high-performance ride. You get an OCLV Carbon frame with Front and Adjustable Rear IsoSpeed and sleek internal storage, a new SRAM Rival AXS wireless electronic drivetrain with a power meter for precision shifting, and OCLV Carbon wheels. *LTD/OEX Specs differ from stock Domane SLR.

- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - The tips are microscopically roughened for optimal bite to the screw. - "Take it easy" tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature

- High quality Kraftform Plus screwdrivers. - Multi-component Kraftform Plus handle - Hard gripping zones for high working speeds whereas soft zones ensure high torque transfer. - Lasertips microscopically roughened for optimal bite to the screw. - ''Take it easy'' tool finder with color coding according to profiles and size stamp - The hexagonal anti-roll feature

- Compatible for Manual and power tool socket insert (ISO 2725-Part 3) - "Take it easy" Tool Finder with color coding according to size - Featuring a good grip to allow easy pick-up even with oily hands. - Ball stop groove, for hex head bolts and nuts; chrome vanadium steel, matt chrome-plated.

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Diameter: 14.8mm - Length: 10.6mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - Shimano HB-C201 Front - 105 HB-1050 Front - Deore LX/Mtn LX Front - STX HB-MC32/30 Front - Shimano HB-A410, HB-A416 Front

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 9.5mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400, 9 Speed Rear - 105 SC 1056, 8 Speed Rear - 105 SC 1055, 7 Speed Rear - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - XT M737, 8 Speed Rear - XT-II M732, 7 Speed Rear - Deore LX M565, 8 Speed Rear - Deore LX/Mtn LX M550, 7 Speed Rear - STX-RC MC38, 8 Speed Rear - STX-RC MC30, 7 Speed Rear - STX MC32/33, 7 Speed Rear - Nexave IMC50, 8 Speed Rear - Alivio MC18, 8 Speed Rear - Alivio MC12, 7 Speed Rear - Acera-X MC290, 7 Speed Rear - Altus RM-40, 7 Speed Rear - FH-R080 Silent Hub, 8 Speed Rear - FH-R050 Silent Hub, 7 Speed Rear

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Left Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Cone Diameter: 17.0mm - Dust Seal Diameter: 25.5mm - Length: 16.0mm - 1 cone per bag COMPATIBLE HUBS: - XT M737, 8-spd Rear - STX-RC MC38, 8-spd Rear - STX/STX-RC MC30/32/33, 7-spd Rear - Alivio MC18, 8-spd Rear - Alivio MC12, 7-spd Rear - Acera-X MC290, 7-spd Rear - Altus RM-40, 7-spd Rear - FH-R080 Silent Hub, 8-spd Rear - FH-R050 Silent Hub, 7-spd Rear