29-Inch

From loose snow to icy freeze-thaw and everything in between, Wrathchild craves the best and worst winter conditions. Deep center lugs aggressively claw into unconsolidated snow for extreme acceleration and braking traction. Super tall side lugs dig into loose snow to provide predictable and confident cornering. Encounter sheer ice on your ride and Wrathchild’s concave studs tear into the surface. - Deep, aggressive lugs dig into snow - Tall side lugs provide cornering confidence - 252 concave studs tear into slick surfaces - Tubeless ready - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss

From light winter trail riding to commuting, the Kahva allows you to carve your way through winter with concave carbide studs as well as single, double, and triple-siped lugs. - Siping on center and side lugs lets the Kahva conform to terrain for increased grip in any riding conditions - Concave carbide studs provide traction in the iciest conditions - 252 carbide aluminum studs - Directional lugs provide low rolling resistance while offering excellent braking traction - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

The ‘turbo’ of spike tires. With 361 spikes it bites firmly into icy roads. The tungsten carbide core of each spike is clad in weight-saving aluminum. The scales stop at 695 g, yet the tire remains agile and sporty. - LiteSkin: The lightest option. LiteSkin MTB tires forego SnakeSkin, but still have high pressure resistant tire beads. If you don't mind the extra effort, these tires can also be converted to Tubeless by using a liquid sealant. - Special Winter compound - Folding Bead

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims - DH casing features 2 ply 60 TPI construction with a butyl reinforced sidewall for maximum durability With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

- Gen 2 Revised tread pattern - New knob layout based on feedback from World Cup DH and EWS riders - "Doublewide" knob now split into two individual knobs - More supportive cornering knobs - Additional siping to enhance braking and cornering traction - Raised ridges on casing to promote mud clearing

The new standard in enduro tires - Dual-compound - Excellent all-around performance - Tubeless Ready (TR) - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Aggressor is designed for high-speed modern mountain bike trails. Advanced knob shaping creates extra gripping edges, and reinforced side knobs offer enhanced stability when cornering at speed. An all-around trail tire excelling on everything from loose cross country race courses to heavy all-mountain riding.

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Refined, redesigned, and ready to shred any line - Ramped and siped tread to roll fast and track straight under braking - Wide trail (WT) casing specs are optimized for 30-35mm inner width rims With side knobs borrowed from the legendary Minion DHF but widened to provide more support, the DHR II corners like no other. The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control. Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo!

The Rekon is an aggressive trail tire inspired by the Ikon - Designed for aggressive XC trails - Wide trail (WT) casing is optimized for 30-35mm inner width rims The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking, and L-shaped side knobs ensure support when carving loose turns. With confidence like this, you can race more and scout less with the Rekon.

Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.

The legendary High Roller returns with an all-new hybrid tread design, but the same old winning ways! Developed with extensive input and testing from Maxxis' World Cup athletes, the third generation of the High Roller is built to take on mixed conditions at high speeds - The third gen High Roller slots into the Maxxis gravity range between the Assegai and the Shorty - Widely-spaced tread clears debris better than the Assegai and it performs better in drier conditions compared to the Shorty - Built to take on mixed conditions at high speeds - Center tread uses a mid-spike design similar to the Shorty but with a lower knob height - Knobs provide excellent soil penetration in soft, loose, or dusty conditions while remaining stable enough to prevent squirm on hard surfaces - Cornering traction is enhanced via large, well-supported side knobs for predictable handling - A versatile choice when conditions are soft or loose, but don’t quite warrant a mud spike - All Maxxis tires 2.40" and up are considered WT according to Maxxis whether or not they are labeled WT - 3C MaxxGrip: the ultimate in grip and slow rebound properties for unparalleled traction in downhill applications - DD: Designed for Enduro racing and ebike use. Two layers of lightweight 120 TPI casing material are combined with a butyl sidewall insert to create a highly durable tire with more trail feedback than a Downhill casing tire - TR: Tubeless Ready means the ability to run lower pressures, improving traction, lowering rolling resistance, and less chance of flatting - Recommended installation: Front or rear - Tire Diameter: 29" - ISO Diameter: 622 / Mountain / 29er - Labeled Size: 29 x 2.4" - Casing: 60tpi - Max Pressure: 50psi - Bead: folding - Weight: 1,299g. (29 x 2.4")

Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with the much-loved Magic Mary. - Long supported braking edges for maximum braking traction - Extremely stable shoulder blocks for outstanding cornering grip - Open and aggressive tread for excellent grip and self-cleaning

BIG BETTY IS BACK! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary up front. - For Downhill and Enduro - Long, supported brake edges - Extra-strong shoulder knobs - Good self-cleaning properties

Dirty Dan from Schwalbe.

THE ULTIMATE GRAVITY TIRE. Indisputably the favorite among Schwalbe Downhill and Enduro athletes, the Magic Marry offers perfect all-around characteristics for almost all tracks and conditions. The sophisticated intermediate profile is combined with the best compounds and construction, pushing the limits to surprising levels. - Strong shoulder studs and aggressive, open tread design provide maximum braking traction and cornering grip, even in extremely muddy terrain. - Equipped with V-Grooves specially developed for Magic Mary, every stud can bite into the ground for even more grip. - Angled studs in the middle of the tread optimize the rolling characteristics.

- The favourite among downhill and enduro experts. - The perfect choice for virtually any track. - Intermediate tread: maximum brake traction and corner grip even on extremely muddy terrain thanks to strong shoulder studs and the aggressive, open tread design.

The Shredda Front tire was designed for the steepest uphill passages. A new Radial carcass allows for a larger contact patch and conforms to terrain yielding more grip, more comfort, and more control to keep you on the trail. - Literally sticks to the ground as the tire deforms more precisely at specific points - Profile optimized for radial carcass: Open tread design with high tread depth for excellent traction especially on soft surfaces - Radial carcass tires offer approximately 30% more contact area than conventional tires at the same air pressure. Even if the air pressure is increased by 50%, the contact area is still 15% larger - The carcass material overlaps for a shorter time and with less tension. As a result, the tire deforms more selectively and can react much more flexibly and adaptably to unevenness without sacrificing control - The increased contact area and the more flexible response behavior provide significantly more grip, more damping, more control and more comfort

Tacky Chan is a high-performance downhill and enduro tire designed and engineered for maximum grip, control, and durability, it excels in loose, muddy, and technical terrain where precision and confidence are critical. Whether you're charging down steep rock gardens, railing berms, or battling through root-laced trails, the Tacky Chan offers the ultimate combination of grip, precision, and durability for riders who demand the best from their tires. - Aggressive tread design with an advanced lug pattern optimized for high-speed cornering, braking stability, and self-cleaning in wet conditions - Optimized rolling resistance – the tread pattern is designed to maintain a reasonable rolling speed, making it versatile across varying terrains - Available in 27.5” and 29” options with various widths to accommodate different riding styles and conditions - Durable casing options available in Schwalbe’s Super Downhill and Super Gravity constructions, ensuring puncture resistance and stability for aggressive riding - 10% more stable shoulder lugs compared to the Magic Mary for even more aggressive cornering - Long braking edges allow later braking point, while an open shoulder area provides direct feedback and improves self-cleaning - Ramps on center lugs for optimal rolling characteristics and speed

The Aspen is a lightweight XC tire that is designed to roll fast and still provide enough traction to keep you going when the trail gets rough. - Low profile tread design rolls fast and still delivers grip for climbing and braking - Aggressive side lugs dig into soft terrain to provide additional cornering traction - Intended use: hardpack, loose over hard, medium - MaxxSpeed features a high-silica content compound that reduces rolling resistance while also enhancing wet traction - EXO casing provides protection on sidewalls for extreme cut and abrasion resistance while remaining lightweight and highly flexible - Team-spec tires feature a lighter, faster, and more supple 170 TPI casing for the lowest weight possible, with a reduction in durability

Greg Minnaar’s signature tire – the Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire. Rubber: Dual compound (best for dry, hard conditions) 3C MaxxTerra (best for mixed conditions) 3C MaxxGrip (best for soft, wet conditions) Casings: 60 TPI + EXO (general trail use) EXO+ (heavy duty trail use) DoubleDown (enduro use) Downhill (DH race, bike park, gravity) Wide Trail (WT) sizes are optimized for 30-35mm inner width rims Tubeless Ready specs are denoted with a “TR” in the tables below Category: Trail, Enduro, Downhill Recommended use: All trail, enduro, and downhill conditions Recommended installation: Front

Troy Brosnan's go-fast signature tire. - Ideal for dry, fast trails - Tubeless compatible - Wide Trail casing optimized for 30-35mm rims Designed in conjunction with Aussie DH racer, Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear, depending on trail conditions.

The original Forekaster was designed as a wet weather option for XC, while the new version is aimed squarely at modern short travel (100mm-130mm) trail bikes - aka the “downcountry” segment. Intended to be a “Goldilocks” tire, the new Forekaster rolls fast but also provides solid cornering and braking traction in a broad range of trail conditions.

The Maxxis Ikon is a versatile XC tire designed to perform in a broad range of conditions. With its predictable handling, the Ikon is also a favorite among our slopestyle athletes.

- The new incarnation of the Minion DHR. Ready to shred any line - Excellent cornering traction - Pair it with a Minion DHF up front for the ultimate aggressive trail riding tire combo! - Plus sizes available - Wide Trail casing optimized for 30—35mm rims