The heart of the connected cadre. The SRAM RED eTap AXS rear derailleur is AXS enabled for easy personalization and designed for both 1x and 2x systems. Advanced chain management keeps it silent and secure no matter the terrain. The derailleur also comes with faster pulleys, bearings, motors and signals, improving speed in every way. - SRAM AXS enabled for easy personalization - Orbit chain management technology keeps drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Improved motor and signal travel for faster shifting - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries - Battery sold separately
More than a mechanical derailleur with a battery and a motor bolted on, the Eagle AXS derailleur is the heart of the whole AXS system. It features a shorter cage for 10mm more ground clearance, with more chain wrap on the cassette to sit slightly further forward, and further inboard from mechanical Eagle. Instantaneous shifts from a single touch even while under World Cup-winning chain loads recorded in the heat of racing and affirmed in the test lab. Tested to IP69K water and dust proofing standard so whatever race day brings, you’re ready. - XC focus and trail ready - Carbon cage - Ti hardware - Rainbow colorway - Eagle technology - Overload Clutch protection - AXS enabled componentry software that makes it possible to both program and personalize new SRAM and RockShox components - System is completely water and dust proof to IP69K - Eagle AXS is designed to work with X-DOME Eagle cassettes only, providing the most precise, silent, and reliable shift performance available. - Battery sold separately
The SRAM RED eTap rear derailleur executes shifts the instant you demand, wirelessly. It's easy to set up, clean in appearance, and delightfully uncomplicated. Mechanical necessities, such as a carbon pulley cage, ceramic pulley bearings, and anodized alloy artfully blend with proprietary electronic advancements to deliver a shifting wonder. - SRAM eTap shift logic and wireless operation - Fits all 11-speed SRAM road cassettes up to 11-32T - 2x and 1x compatible - Updated version of the original SRAM RED eTap rear derailleur - Orbit chain management technology keeps drivetrain quiet and secure - Larger X-SYNC pulleys and ceramic bearings for increased durability and efficiency - Compatible with existing eTap batteries
$489.99 - $490.00
One rear derailleur to rule them all. The SRAM Force eTap AXS rear derailleur is designed for both 1x and 2x systems. It capitalizes on X-Range gearing technology for enhanced range and chain management and features larger pulleys for improved durability and efficiency. Strong, smooth, quiet and AXS enabled. - SRAM AXS enabled, allowing easy personalization - Orbit chain management technology keeps the drivetrain quiet and secure - A single rear derailleur for all gearing combinations, including 1x and 2x - Larger X-SYNC pulleys for increased durability and efficiency - Compatible with existing eTap batteries
It takes a degree of passion for the sport that can’t be faked to fully appreciate SRAM RED. It was created to blur the boundaries between machine and athlete. The SRAM RED rear derailleur was designed with Exact Actuation technology for precise, efficient shifting. Carbon fiber, titanium, and ceramic bearings complete the spec. The result adds to its legacy as the heart of the purest groupset for the pursuit of cycling excellence. - SRAM 11-speed compatible - WiFLi option - Carbon cages, carbon inner links, titanium hardware - Exact Actuation shifting provides fast and accurate shifts - Silent shifting with optimized AeroGlide pulleys, ceramic bearings - Spring-fixed barrel adjuster - Chain pulley cage adds precise chain management - Titanium pinch bolt keeps a low profile while minimizing weight - Speeds: 11 - Material: Carbon cages, Carbon inner links, Aero designed titanium hardware - Weight: 145 grams short cage), 165 grams (mid cage) - Compatibility: SRAM RED & Force Rear Shift-Brake levers, SRAM R2C Aero SL-1190 shifters, - SRAM R2C Aero SL-1150 shifters, SRAM 900 Aero brake levers, SRAM 500 Aero brake levers - Finish: Falcon grey & black anodized - Tech Highlights: AeroGlide Pulleys, Exact Actuation - Largest Cog (teeth): 28 (short cage) 32 (WiFli Medium Cage)
With SRAM's WiFLi RED Rear Derailleur, SRAM set out to make their already race-proven design faster, quieter, and able to accommodate a full 11-32 cassette for a huge gear range. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Fast, quiet, and capable, the RED derailleur delivers!
This derailleur not only answers the Eagle drivetrain’s need for greater capacity, but is also the next evolution of SRAM's proven, 1x-specific X-HORIZON design. The larger, 14-tooth X-SYNC lower pulley, allows 10- to 50-tooth cassette capacity in this compact design, and also adds to Eagle’s overall smooth-pedaling feel. SRAM's Type-3 ROLLER BEARING CLUTCH features a smoother torque curve for a quieter, more consistent operation and feel. CAGE LOCK has been moved back and out of the way, protecting it from trail debris. A redesigned, robust mounting system further improves the Eagle derailleur’s performance and overall durability.
With SRAM's RED Rear Derailleur, SRAM set out to make their already race-proven design lighter, faster, and quieter. Through careful analysis of design, material selection, and component integration, they achieved all three. Refined shaping and a hollow titanium fixing bolt lighten the overall weight while maximizing performance. Carefully sculpted jockey wheels work together with the new chain pulley cage for lightning-fast, ultra-precise shifts. An updated elastomer coating applied to the jockey wheels makes for extra quiet operation. Plus, a redesigned shift cable routing makes set-up and adjustment easier than ever! Light, fast, and quiet, the RED derailleur delivers!
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
The 7-speed X-HORIZON rear derailleur makes shifting smooth and reliable no matter where you ride. Engineered to maintain consistent chain gap across all seven gears, X-HORIZON eliminates vertical movement for faster shifting, reduced shift force, and an end to ghost shifting. Our new, Type-3 roller bearing clutch features a smoother torque curve for a quieter, more consistent operation and feel. The 12-tooth X-SYNC pulley wheel holds the chain in place, reducing bounce and chain slap. Additionally, CAGE LOCK technology makes wheel removal and installation easier than ever. Paired with the X01 DH 7-speed shifter, X-HORIZON forms the backbone of X-ACTUATION technology—and that means completely smooth shifting action. - Updated design of the rear derailleur incorporates our proven X-HORIZON design and new Type-3 roller bearing clutch technology - 12-tooth X-SYNC pulley wheels - Large upper pulley offset automatically adjusts chain gap - Sealed cartridge bearings
Shimano's electric-shifting 11-speed Ultegra Di2 Rear Derailleur is driven by battery power and a servo motor, so shifts are fast, precise, and perfect every time. It's made of light, tough cold-forged aluminum while mid-cage and short-cage models give you your choice of cassette. Since there aren't any cables or housing to stretch or fail, maintenance is dramatically reduced and shifting accuracy is unprecedented. This high-tech derailleur is even designed to move inward under impact to reduce the potential for damage in a crash.
The SRAM Force 1 rear derailleur adopts all the technologies of SRAM 1x MTB to provide the fastest, quietest 1x shifting available. SRAM’s unique clutch system eliminates chain slack, providing for smoother, quieter, and more secure chain travel. - A dedicated 1x rear derailleur - EXACT ACTUATION for fast and accurate shifts using SRAM’s 1:1 actuation ratio (shifter cable travel: derailleur movement). - 10- and 11-speed compatible - X-SYNC pulley features a 12-tooth design that helps control the chain’s lateral movement - X-HORIZON “straight parallelogram” design limits all movement to the horizontal axis, which makes ghost shifting impossible while also reducing shift force - ROLLER BEARING CLUTCH’s one-way roller clutch controls chain tension for consistent shifting - Cage Lock technology makes for fast wheel changes or chain installation - Available in Short: 11-26 through 11-28 / Medium: 11-26 through 11-36 / Long 11-32 through 10-42 cage lengths Short Cage: Chain Wrap Capacity (teeth): 18 teeth Largest Cog: 28 Weight: 250 g Medium Cage: Chain Wrap Capacity (teeth): 26 teeth Largest Cog: 36 Weight: 262 g Long Cage: Chain Wrap Capacity (teeth): 32 teeth Largest Cog: 42 Weight: 271 g
SRAM's X01 Rear Derailleur packs a massive amount of technology into its compact, lightweight body. This 11-speed gear changer uses a “horizontal parallelogram” design that limits all movement to the horizontal axis, reducing the force it takes to shift. The Type 2 clutch is brilliant. This self-lubricating, one-way roller clutch controls your chain tension to eliminate chain slap and give you smooth, consistent shifts over any terrain. For quicker, smoother, more exact shifting, the large upper pulley's offset design maintains a consistent chain gap across all gears.
SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52T cassettes, it's also backward-compatible with 10-50T cassettes for greater versatility and incremental upgrade. It's finished with the new GX Eagle master colorway to complement any cassette and chain colorway a rider wants from the Eagle Colorsystem. - Backward-compatible—works with both 10-50T and newer 10-52T cassettes - Updated cage architecture provides better chain retention and precise shifts
SRAM's Force WiFli Rear derailleur is made for wide-range 2x10 systems. Its long cage can handle an 11-32 cassette! You get the huge gear range of a triple with reduced weight and better shifting. Of course, the WiFli still uses SRAM's renowned Exact Actuation technology for precision shifts every time. Plus, the Force is crafted with cutting-edge materials, such as a super-light carbon cage and a magnesium inner link for feathery low weight, flawless shifting and reliability.
Leveraging the legendary history of SRAM shifting, the GX 2x11 rear derailleur provides incredible shifting speed and precision. X-Actuation technology eliminates slop and shifting variation while SRAM's roller bearing clutch technology delivers maximum drivetrain stability—even through the most punishing terrain. And with SRAM's Cage Lock, wheel removal and installation are easier than ever. • X-Actuation for precise and dependable 11-speed performance • Focused chassis design for all conditions and usage • 10-42-tooth wide range cassette compatible
SRAM's GX 1x11 X-Horizon rear derailleur is engineered for smooth, reliable shifting action—from the larger upper pulley offset to the 12-tooth X-Sync pulley wheels. By eliminating unwanted chain movement, this X-Horizon rear derailleur shifts faster, puts an end to ghost shifting, and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. • Long cage • X-Horizon design reduces shift force, ghost shifting, and chain slap • 12-tooth X-Sync pulley wheels • Large upper pulley offset automatically adjusts chain gap • Sealed cartridge bearings • Aluminum Cage
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience with shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features and ON/OFF switch for the chain stabilizer. The RD-RX812 rear derailleur is compatible with MTB cassettes with a max cog size of 42T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Smooth and reliable mixed-surface shifting - Compatible with current road Dual Control Levers - High cog: Max. 11T/Min. 11T - Low cog: Max. 42T/Min. 40T - Total capacity: 31T
We understand that the gnarly line requires a lot more focus than a lap of the supermarket. That's why we packed the GX DH 1x X-HORIZON rear derailleur with World Championship-winning features and gave it a price tag that speaks more to the Wednesday Night Championships. This is a DH derailleur that is easier to shift, is incredibly precise, and keeps the unwanted noise of chain slap to a minimum, so you can concentrate on the sweet feeling of nailing your line. GX DH—Get Some. - X-ACTUATION for precise and dependable 7-speed performance - Fully compatible with the SRAM X01 DH drivetrain - X-HORIZON design that reduces shift force, ghost shifting, and cage slap - 12-tooth X-SYNC pulley wheels
Ultegra RX brings Shimano's pioneering chain stabilizing technology to road cycling, delivering smooth and precise shifting over technical terrain. It expands road bike capabilities, inspiring confidence on any surface and drives the evolution of road cycling to include greater elements of adventure. No longer is the road bike narrowly defined. Shimano Ultegra RX broadens the notion of drop bar riding and emboldens cyclist to explore further. - Chain Stabilizer mechanism adopted from MTB design - Stabilizer ON/OFF switch - Compatible with current road dual control lever - Shadow RD technology - Direct mount compatible - Maximum cog size: 34t - Total capacity: 39t
Incredibly fast, astonishingly quiet, and impressively precise — fly through all 11 gears with SRAM's Force 22 WiFLi Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 WiFLi at a svelte 190 grams. The WiFli version shifts up to a 32T max cog for a super-wide gear range.
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
Shimano's Deore XT Rear Derailleur uses cold-forged construction and cutting edge technology to deliver crisp shifting, real-world reliability, and trademark precision. Plus-type derailleurs use a lever-actuated clutch spring to prevent chain slap, reduce noise while on the trail, and improve chain engagement when riding over rough terrain. Sealed pulley bearings keep things spinning smoothly, and wide plate construction prevents the derailleur from getting clogged with mud and debris.
Incredibly fast, astonishingly quiet and impressively precise — fly through all 11 gears with SRAM's Force 22 Rear Derailleur. It takes advantage of SRAM's Exact Actuation technology for precision shifts every time. Carefully shaped jockey wheels work together with the sculpted chain pulley cage for lightning-fast, ultra-precise shifts, and an elastomer coating applied to the jockey wheels makes for extra quiet operation. A carbon outer cage, aluminum inner cage, and magnesium inner link keep the Force 22 at a svelte 178 grams.
Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system
The SX Eagle derailleur features the proven SRAM 1x-specific X-HORIZON design and easily facilitates 11-50T and 10-52T cassette capacity, providing quiet, consistent performance and durability. - X-SYNC pulley technology provides greater efficiency, crisper shifting, and quieter operation. - Cage Lock offers discovery-level riders easy trailside wheel removal.
SRAM’s Apex 1 drivetrain provides the gear range and the shifting simplicity to let you simply go where you want. The Apex 1 rear derailleur makes that gearing choice a reality with clean, crisp shifts, thanks to SRAM’s X-Horizon geometry and their Roller Bearing Clutch. - X-Horizon design reduces shift force, eliminates ghost shifting and chain slap - Compatible with 10-speed and 11-speed SRAM 1x road systems - With Cage Lock technology, wheel removal and installation are easier than ever - Equipped with Roller Bearing Clutch - Large upper pulley offset automatically adjusts chain gap - Weight: 314 grams - Outer Cage: Steel - Compatibility: 10-speed and 11-speed SRAM 1x road systems - Inner Cage: Steel - Cage Size: Long - Max Tooth: 42t - Pulleys: Sealed cartridge bearings - Pull: Exact Actuation
The SRAM NX X-HORIZON rear derailleur provides the same smooth, reliable shifting action as XX1—from the larger upper pulley offset to the 12-tooth X-SYNC pulley wheels. By eliminating unwanted chain movement, X-HORIZON shifts faster, puts an end to ghost shifting and reduces shift force and chain slap. And with Cage Lock technology, wheel removal and installation are easier than ever. - X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - Fully compatible with all SRAM MTB 1x drivetrains - Most affordable fully featured 1x rear derailleur in the industry - Speeds: 11-speed - Weight: 322 grams - Color: Black - Compatibility: X-ACTUATION - Bearings: Steel - Cage Size: Long - Max Tooth: 42
Page 1 of 2 Next page