Cassettes/Freewheels

FULL PIN technology uses ten lightweight, stamped steel cogs and one 42t aluminum cog held together with 123 high-strength stainless steel pins. The result: a cassette that’s light, durable and equipped with SRAM’s super wide 10-42 gear range that’s a perfect fit for any ride. The open design similar to SRAM's X-DOME cassette aids in mud clearance, giving you cleaner shifting performance and longer component life. - FULL PIN technology uses ten lightweight, stamped steel cogs and one 42t aluminum cog held together with 123 high-strength stainless steel pins - Super wide 10-42t gear range—a perfect fit for any ride - Optimized gear steps across entire range - Open design aids in mud clearance - XD driver body creates more stable hub connection - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 10-12-14-16-18-21-24-28-32-36-42 - Drivetrain Speeds: 11 - Weight: 325 g

No mixed messaging or compromises here. The GX DH cassette was built with only one purpose in mind—exploiting gravity to its fullest lap after lap. This downhill-optimized 7-speed cassette provides gear steps that give each shift more purpose, and its compact design allows more spoke clearance. It’s a full-on, dedicated SRAM 1x cassette for gravity that lets you keep some money for a lift ticket. GX DH—Get Some. - The PG-720 cassette is an integral part of the SRAM 1x DH drivetrain system - This is the most affordable full-featured, dedicated 1x DH cassette in the industry - Fewer cogs allow for a faster transition from starting cog to highest cog - More rear wheel clearance around spokes - Fully compatible with the SRAM X01 DH drivetrain - Splined driver body compatible - Weight: 224 grams - Gear-Ratio:11 – 25T - Speeds: 7 - Recommended Group: GX DH

Turn any 8-10 speed HG-splined cassette hub into a 3/32-inch 16-tooth singlespeed.

• Steel construction on all but the largest aluminum gear • Nickel-plated finish for corrosion and wear resistance • Dyna-sys 11-speed cassette with "Rhythm step" gearing for closer gear ratios and smoother shifting performance • Fits Dyna-sys 11-speed and current Shimano 9/10-Speed MTB hubs • The largest cog (40t) is positioned inboard and above the drive-side flange • Hubs with tall drive-side flanges may not be compatible due to spoke interference

Shimano Deore M6000 CS-HG500-10 10-speed cassette. Combinations: - 11 – 25T: 11-12-13-14-15-17-19-21-23-25T - 12 – 28T: 12-13-14-15-17-19-21-23-25-28T - 11 – 32T: 11-12-14-16-18-20-22-25-28-32T - 11 – 34T: 11-13-15-17-19-21-23-26-30-34T

Maximum range, minimum fuss. This 12-speed 11-44T cassette provides 2x range in a 1x package and fits on a traditional 11-speed driver body for broad integration. The smooth cog progression keeps jumps between cogs tightest when it's time to go fast, with more meaningful gaps for climbing. - 12-speed - 400% range gives the coverage 1x riders want - Cog sizes: 11, 12, 13, 15, 17, 19, 21, 24, 28, 32, 38, 44 - For use with XPLR 1x rear derailleurs - Compatible with Flattop chains - For 11-speed road driver bodies

SRAM's PG-730 7-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts throughout its 12-32 tooth range.

The BOX Two Prime 9 Cassette delivers long service life and extra range. All cogs are stamped from steel and the larger ones are pinned to alloy spiders. - Cogs pinned to lightweight spiders - Ultra-wide ratio with consistent progression - Prime 9 technology - Compatible with HG freehub bodies - 12 – 50T: Rated for eBike use

Shimano's 11-speed SLX cassette features the same computer-designed shift profiles that have made Shimano shifting synonymous with speed and accuracy. - Series: SLX - Average Weight: 467g

SRAM's PG-970 9-Speed Cassette is the perfect replacement for your worn-out gears. It features a rugged steel construction for awesome durability and SRAM's PowerGlide technology for smooth, precise shifts.

The XX Eagle T-Type 12-Speed 10-52t cassette is a major reason why Eagle Transmission offers one of the best-ever inboard and outboard shifting performance under load. Thanks to its full X-Sync design, the harder you pedal, the better it shifts. Literally. Engineered as integrated and interdependent transmission components, the XX Eagle Transmission Cassette and derailleur contact directly, ensuring perfect alignment on every bike. - From its massive 520% gear range, the 52 tooth cog steps down with improved gear progression with 44 and 38 tooth cogs in the low end (compared to the Eagle drivetrain 10-52-tooth cassette) - Lasts far longer and delivers more precision with the use of less extreme chain angles throughout the entire range - Featuring a clearly marked Setup Cog, install is both simple and fool-proof - Utilizes hardened tool steel machined X-Dome design for the cluster and stamped steel 38t and 44t cogs are pinned to the lighter weight aluminum 12th gear (Spider Cog) - 55mm chainline compatibility for more moderate chain angle, longer wear and greater precision - Utilizes well accepted and broadly available XD driverbody

Simplify your drivetrain with SRAM's XG-1195 11-Speed X-Glide Cassette. It has a monstrous 10-42 tooth spread that gives SRAM's 1x11 drivetrain pretty much the same gearing as 2- and 3-ring setups, with less weight, parts, and complexity. Yes, you can still spin up your hardest climbs. A key thing to note, is that even with the huge range, there are no huge jumps or dips in the gearing, so your cadence and pedaling stay consistent as you move up and down the entire cassette. The wide-open design makes it incredibly lightweight and aids in mud clearance, giving you cleaner shifting and longer component life. The XG-1195 is for use with SRAM's X01 or XX1 drivetrain.

The Box Two E-Bike Cassette differentiates itself from its non-e-bike sibling by offering high gears with more teeth to withstand the rigors of modern E-Bike riding. Adding an extra tooth to each of the three highest gears provides increased durability and decreased wear by distributing the load over a larger area! All cogs are stamped from steel and subsequently, the larger ones are pinned to alloy spiders. Due to its provenance, this is, without a doubt, the most durable cassette in the range and perfect for any E-MTB. FEATURES - Our Most Durable Cassette - Steel Stamped Cogs - Lightweight Alloy Spiders - Ultra-Wide Ratio with Consistent Progression COMPATIBILITY - Box One Prime 9 Chain 126L DLC Black - Box Two Prime 9 126 Link Chain Nickel - Box Three Prime 9 126 Link Chain Polished - Box One Prime 9 Rear Derailleur - Box Two Prime 9 X-Wide Rear Derailleur Black - Box Three Prime 9 X-Wide Rear Derailleur Black - Box One Prime 9 Single Shifter Black - Box Two Prime 9 Single Shifter Black - Box Three Prime 9 Single Shifter Black

The TRS Plus Cassette offers impressive range and crisp shifting performance on both SRAM and Shimano drivetrains. Using a unique two-piece, individually replaceable assembly and a 9t cog, the TRS+ provides superior ground clearance in a compact package so you can clean steeper climbs. More range, more fun, same standard. - The TRS Plus cassette plugs directly into all SRAM Eagle and Shimano XTR, XT, and SLX 12-speed drivetrains - Smaller 9-46T cassette gives a better chainline, for longer-lasting drivetrains - The assembly utilizes XD™ Driver mounting to enable a 9-46T 12-speed cassette, keeping the drivetrain simple, yet providing the gear range of a 2X system - Designed to offer better ground clearance and be run with a smaller chainring to keep equivalent 10-50T gearing (10-50T w/34T chainring = 9-46T w/32T chainring) - 511% range - Cassette Body Type: SRAM XD 11/12 Speed - Cassette Cogs: 9-10-12-14-16-18-21-24-28-33-39-46 - Drivetrain Speeds: 12 - Color: Black - Weight: 336 g

Sometimes less is more. With 10 speeds, an 11-48T range, and evenly spaced gear steps, the ADVENT X cassette allows riders to shift less often to find the right gear, while still having enough range to ride what they want. Fewer cogs also means less weight and a wider chain for better mud shedding. It even fits on standard 10-speed freehub bodies so you don't need to buy new wheels for no reason. In short, it's everything you want in a high-end drivetrain. - 11-48T range with even gear steps for predictable gear changes - Hardened steel cogs are optimized for eBike compatibility - ED black with anodized surface finish - Continuously forged precision cogs

CS-G110 cassettes combine microSHIFT's continuously molded cogs with a CNC machined aluminum spider to deliver rapid, precise shifting at a lower weight. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - CNC machined aluminum alloy spider carrier saves weight - Sprockets are chrome-plated for hardness and corrosion resistance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Aluminum lock ring Combinations: - 11 – 25T: 11-12-13-14-15-16-17-19-21-23-25 - 11 – 28T: 11-12-13-14-15-16-17-19-21-24-28 - 11 – 32T: 11-12-13-14-15-17-19-21-24-28-32

MicroSHIFT's 7-speed cassettes are nickel plated for durability and constructed using the same processes as microSHIFT's higher-end cassettes, resulting in rapid, responsive shifting at an affordable price. - Nickel plated - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 7-speed systems - Steel lock ring - Cassette Cogs: 12-13-15-18-21-24-28