Taillights

To further rider safety and visibility, the CherryBomb 100 employs a custom-made, built-in reflector that allows the rider to be night time visible even when the taillight is in the off position. Clip and bike mounts are included for flexible mounting options. Features - Lumen Output: 100 - 4 Modes with a Run Time up to 136h - 2 x AAA Alkaline Battery Powered - Weight: 82g - Battery: 2 x AAA Alkaline - Highly Visible up to 1 Mile - 100 Lumen Daylight Visible taillight - Water / Dust Resistant IP64 Rated Run Time - Fast Flash—96:00h - Pulse Flash—136:00h - Steady High—72:00h - Steady Low—127:00h

Long running battery-powered rear light with high waterproof rating of IPX7. Built-in "Brake Mode" function will alert others behind you of your deceleration. - Built-in acceleration sensor for Kinetic mode (Brake mode) - Automatically turns on Hi for 2.5 sec when bike deceleration is detected - Waterproof IPX-7: Operates even after 30 minutes of submersion in a depth of 1 meter - Long runtimes - 360 degree visibility - 5 LEDs - 3 modes - Mode memory function - FlexTight SP-11 bracket (Ø12-32mm) - Snap System - Flashing Mode: 160 Hrs - Constant: 70 Hrs - Rapid Mode: 140 Hrs

The KTV Drive+ Rear is a compact yet powerful rear light that ensures optimal visibility and safety on your rides. With a maximum output of 40 lumens, an impressive 45-hour runtime in Femto mode, and six different output modes, including Daytime Flash, this rear light provides reliable illumination. The unique design is compatible with aero and round seatposts, ensuring versatility for various bike setups. The light utilizes our Wide-Angle Optics lens design to provide 270° of visibility, and an integrated USB stick allows convenient cable-free recharging. Rigorously tested to IPX7 Waterproofing standards, it can withstand challenging weather conditions. - Max 40 lumens / 45-hour runtime in Femto mode - Max 40 lumens / 45-hour runtime in Femto mode - Daytime Flash mode with Highly Disruptive Pattern - Wide Angle Optics: 270° of visibility - Unique aero and round seatpost compatible design - Rigorously tested to IPX7 Waterproofing standards - Integrated USB stick for cable-free recharging - 400 mAh battery capacity

This handy clip-on light may be the most important accessory you pick up for your bike trailer. Stay safe while riding in low-light conditions by adding extra visibility to your trailer. With 5 LED bulbs and 4 light modes, you’ll be easier to see for drivers and other cyclists, day or night. You’ll Love – - 5 LED bulbs for higher visibility - 4 light modes (flashing, constant, chasing, and random) - Compatible with any Burley trailer that has a Light Loop or Light Bracket - Includes clip-on light and 2 AA batteries

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

German StVZO optimized lens with wide light spread. Two high-output LEDs provide 12 lumens. IPX7 water resistant rating. Composite matrix construction. E-bike compatible (6v input, 0.4w / 12v input 0.8w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm-long power cable included. 50 and 80mm mount spacing. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 50 mm - Visible from the side - 40g

- Compatible with 6-12V E-bike battery - Integrated reflector - Water and shock resistant - Mounting distance 80 mm - Visible from the side - 40g

Lights, camera, Electra. Light up your life and your bike. Increase safety while riding by strapping these lights to your bike. Brighten up your bike and guide your ride. - Easily attached and removed with rubber strap - Low power indication - Waterproof design - USB chargeable - Weight: 20g

CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.

The TL 6.0 will help keep you safe and seen from behind (210-degree visibility). The TL 6.0 operates on 2 AAA batteries (included) for up to 60 hours on flash. Features - Lumen Output: 25 - 4 Modes with a Run Time up to 60h - 2 x AAA Alkaline Battery Powered - Weight: 70g - Battery: 2 x AAA Alkaline - Increased safety with 210° of Visibility - Budget Friendly Rear Lighting System - 25 Lumen taillight with Eye Catching Flash Patterns - Water / Dust Resistant IP64 Rated Run Time - Up to 60h

Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.