Your Search: "orbea rise"

The Surly Truck Stop Handlebar combines the benefits of a drop bar with those of a riser bar. Offering a variety of hand positions for comfort over the long haul, it also features 30mm of rise for a more upright and relaxed riding position. With a clean aesthetic, it’s a great option for taller riders looking for more rise and for bikes with a low-cut steer tube. - Lightweight, aluminum construction - Available in various widths - 31.8mm clamp diameter

SRAM's Butter Grease is a Slickoleum lube recommended for fork bushings, Roam and Rise wheel rear hub pawls and Reverb seat post service. Keep your parts working smoothly!

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Grab life by the handlebars. If you've got something good, hold onto it. Update or customize your Cruiser with a variety of custom steel handlebars. For style, comfort or both. - Chrome plate - 690 mm wide x 150 mm rise - 25.4 mm (1?) clamp diameter - Material: Alloy - Weight: 805g

The Odyssey Broc v2 stem is a refined update to Broc Raiford's popular signature Raft stem. The Broc stem utilizes a classic top-load and 6-bolt design, but it now comes with a slightly taller 33mm rise and sleeker lines below the clamp. The bolt heads have been upgraded to a larger size and the clamping area features unique surface contouring for superior handlebar grip. - Special surface contouring and a larger bolt head spec for superior handlebar grip - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter)

Light and compliant for incredible durability and a supple, refined ride, the Ritchey WCS Carbon Rizer Handlebar is the choice for XC riders looking for a high-end carbon bar that's built for performance. The WCS Carbon Rizer features our proven WCS carbon technology, a textured stem clamp area to reduce risk of bar slippage, and is reinforced internally to accept bar ends and shifter/lever clamps. - Carbon monocoque - 30mm rise - 9 degree sweep - Width: 710 and 740mm (710mm USA only) - 31.8mm center section - Matte UD carbon finish - Weight: 180g

With a lifetime of experience of riding and winning on trails and racecourses around the world, the Ritchey tradition of designing ideal handlebars continues with the introduction of the Comp 10D Rizer. Taking inspiration from the original XC 10D flat bar, this 800mm-wide trail bar offers a generous 10° backsweep for perfect wrist alignment, 4° upsweep to reduce pressure on the outside of the hand, and 20mm rise for optimum positioning. All of this combines to deliver a uniquely comfortable and controllable mountain bike experience. Whether ripping your favorite trails from Moab to Houffalize or your local runs, the Ritchey Comp 10D Rizer bar will help deliver a lifetime of great mountain bike experiences. - Material: double-butted 6061 alloy - Width: 800mm - Rise: 20mm - Backsweep: 10° - Upsweep: 4° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 385g

Crucial for dialing-in fit, Ritchey 2x bars help get your hands in just the right position for the best ride performance on your mountain bike. - Material: double-butted 6061 alloy - Width: 740mm - Backsweep: 9° - Rise: reversible +/- 5mm flat rise - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 276g

The new 2X Trail bar is two bars in one: select 5mm of rise or drop while maintaining a 9-degree sweep. Great for 29ers and other bikes with tall front ends. - Material: triple-butted 7050 alloy - Width: 720 and 760mm - Rise: reversible +/- 5mm flat rise - Backsweep: 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

The 2X bar packs the material technology, strength, and weight you expect from a Ritchey bar with an additional +/-5mm of height adjustment. - Material: triple-butted 7050 alloy - Width: 740mm (with cutting marks*) - Rise: reversible +/- 5mm flat rise - Backsweep: 5° and 9° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 232g

Light and compliant for incredible durability and a supple, refined ride, the Ritchey Rizer bar is the choice for XC riders looking for race quality at an attainable price. - Material: triple-butted 7050 alloy - Width: 760mm (with cutting marks*) - Rise: 20 and 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 242g - Cutting must be done by a professional mechanic or Ritchey authorized dealer, though cutting or modifying any Ritchey product will void the warranty.

- The original Chromag bar - Used from XC to DH, the OSX is Chromag's most versatile option - 31.8mm clamp Specs: - Rise: 25mm - Handlebar Width: 800mm - Stem Clamp Diameter: 31.8mm - Handlebar Material: Aluminum - Upsweep: 5 degrees - Backsweep: 8 degrees

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 189g - Note: Salt Flat bars are not compatible with bar ends

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 160mm width for use with Salsa Anything Cradle and aerobars - Weight: 221g - Note: Rustler bars are not compatible with bar ends

Mountain bike terrain is bigger and burlier than ever, so why shouldn’t your components be? Our Guide 35.0 Carbon handlebar increases front-end strength and stiffness for more precise handling inputs. The carbon fiber construction keeps weight to a minimum and soaks up trail chatter. Pair these carbon mountain bike handlebars with our Guide Trail 35.0 Stem and carve, drop, pump, and jump your way down the mountain with confidence. - Bar Clamp Diameter: 35.0mm - Color: Carbon - Width: 760/800mm - Rise: 10/20/40mm - Back Sweep (deg): 8 degree - Upsweep: 5 degree - Material: Carbon

A great bar for your fixie, single speed, or cruiser. - Aluminum Arc bar with wide sweep - May come in OEM packaging - Back Sweep (deg): 27 - Material: Aluminum - Rise: 0mm

Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy

A wealth of rise and plenty of backsweep make Dimension Cruiser bars great for a comfortable, upright riding position. - AL-6061 aluminum alloy - ISO4210 safety tested for city/trekking use - Not recommended for use with bar-ends or clip-on aero bars - 50-degree sweep

For cross country and all-mountain riding, Dimension Mountain bars provide generous—but not ridiculous—width, rigorously tested to ISO 4210 Mountain standards. - Shot-peened finish - 6061-T6 Aluminum - 9-deg backsweep - 720mm wide - 35mm rise

Designed for Trail, Enduro and XC riders and racers, the Fatbar Lite Carbon is the product of an intense and in-depth research and development program. This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption - Full uni-directional (UD) carbon construction with efficient orientation and placement of the fibers to maximize strength and fine tune stiffness - UD carbon fiber layup is specific to each model and rise

- Strong yet competitively lightweight alloy single crown stem for all disciplines - Unique style, modern geometry, and rock-solid construction, without the heavy price tag - Dial your fit with micro-increment size options, tuned to fit any rider size and style - Cockpit setup index lasered onto stem helps with tuning of upsweep and backsweep - Ultra-short stack height and true zero-degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars

FSA's Metropolis multi-position handlebar features a stylish wing shape for an ergonomic, flip-flop design at home on your commuter, cruiser, or cafe racer. Set it as a high flyer or low rider to suit your personal and riding styles. - Weight: 300g - Width: 620mm - Backsweep: 46.5­° - Lever Compatability: Mountain 22.2mm - Rise: 32mm

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

- Freeride inspired all mountain suitable geometry makes the bar extremely versatile - Rock solid in the park or on the trail - Cost effective upgrade to your cockpit without sacrificing quality - Shot-peening and anodizing enhances fatigue life even further - Material: Alloy - Weight (g): ±395 (25mm) / ±400 (40mm) / ±420 (60mm) - Diameter (mm): 31.8 - Rise (mm):25 / 40 / 60 - Length (mm): 785 - Geometry (Degree): 5°up x 8°back (25mm) / 5°up x 9°back (40mm) / 4°up x 10°back (60mm) - Finish: Shotpeen anodized, laser logos

Built upon the popular K-Wing ergonomics, this full carbon handlebar is designed for Adventure, Gravel, and Cyclocross. - Aerodynamic integrated Cable Routing (ACR) - Full carbon handlebar is designed for Adventure, Gravel and Cyclocross - Sculpted contact points for the "hoods" and "drops" riding positions for better ergonomics - Flared drops for better control and clearance when descending - Bar Clamp Diameter: 31.8mm - 115mm drop, 76mm reach - 12° outward bend - 10° forward angle - 25mm offset drops - 5mm rise - 205 grams (420mm)

- A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9 degree backsweep and 5 degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength to weight ratio - Base Handlebar uses 6061 aluminum

EA50 alloy continues to provide both performance and excellent fitment options at a competitive price. From 3D forging processes to our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA50 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA50 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 140 (100mm/7) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"

Hallelujah – high rise waistbands are here. In addition to a comfortably wide, high rise waist, Terry has engineered the Holster Hi Rise Capri with deep, stretchy, perforated pockets at both sides for quick, convenient access. Updated this season with new fabric that has a slightly higher level of compression, the Holster is well suited for longer distances. The additions of a mid-calf length and the premium Flex Air Chamois make this a great choice for multi-seasonal riding. - nylon/spandex fabric with a moderate level of compression is comfortable for extended rides -  sculpted 6-panel fit with flat seam construction to help prevent chafing -  ultra-wide, contoured, extra high waistband aids in feeling supported and covered while in the bike position - deep mesh hip pockets at both sides for an alternate on-bike carrying strategy - 2 inch elastic-free, self-fabric leg bands for comfort -  Flex Air Chamois with soft wing technology & perforated foam for breathability - Breathable - Moisture Wicking - Antimicrobial

Hallelujah – high rise waistbands are here. In addition to a comfortably wide, high rise waist, the Holster Short is engineered with deep, stretchy, perforated pockets at both sides for quick, convenient access. Updated this season with new fabric that has a slightly higher level of compression, the Holster is an all-day endurance short thanks to Terry's Flex Air Chamois. It's a great choice for all kinds of riding from gravel to touring to mountain biking. - nylon/spandex fabric with a moderate level of compression is comfortable for extended rides -  sculpted 6-panel fit with flat seam construction to help prevent chafing -  ultra-wide, contoured, extra-high waistband aids in feeling supported and covered while in the bike position - deep mesh hip pockets at both sides for an alternate on-bike carrying strategy - 7-inch elastic-free, self-fabric leg bands for comfort -  Flex Air Chamois with soft wing technology & perforated foam for breathability - Breathable - Moisture Wicking - Antimicrobial Flex Air Chamois: Unique to Terry, the Flex Air offers the best shape and construction for women. Seamless chamois with 4-way stretch Elastic Interface Technology provides freedom of movement on the saddle; multi-level foam padding is perforated for increased breathability; light, channeled microfiber fabric in Terry pink is antimicrobial and enhances moisture transfer; soft wing construction reduces bulk at inner thigh to avoid chafing. Made in Italy. Fit Notes: *Note that the 2022 edition of the Holster has a higher compression fit than former versions. We suggest sizing up if between sizes or if you prefer lighter compression.

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

An exceptionally strong carbon fiber 35mm riser bar that’s built to descend. The M7 bar is designed for the most aggressive and demanding riders. Carbon fiber is the ideal material for a gravity bar because fiber orientation and bar shape can be controlled independently and developed in unison, resulting in a tuned flex profile that cannot be achieved with aluminum. This bar is tuned to be precise and responsive while absorbing fatigue-inducing chatter and taking the sting out of the biggest hits. The M7 bar features a trail-perfect 8-degree backsweep and 4-degree upsweep for your long-travel 29er, enduro race bike, or downhill machine. - Material: Carbon - Weight: 230g (10mm rise); 240g (25mm rise); 245g (40mm rise) - Bar Width (Max): 800mm - Bar Width (Min): 780mm - Clamp Diameter: 35mm - Backsweep: 8 Degrees - Upsweep: 4 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

SRAM's Rise 60 conversion caps are the ticket for converting your Rise 60 wheels to a different axle type.

The Slab Stem uses a new design with minimal machining keep cost low and strength high. We also added our small brass badge for a unique style. This stem has a cold-forged body and face plate from 6061 aluminum for high strength, and the recessed top face offers a clean look with our fork preload bolt. - Weight: 11.2-ounce - Reach: 50mm - Stack Height: 30mm - Rise: 31mm (Upright) / 2mm Drop (Invert) - Clamp Bolts: 8 x 1.25mm hardened chromoly (x4) - Pinch Bolts: 8 x 1.25mm hardened chromoly (x2)

EA70 alloy continues to provide an impressive balance of performance and value. From lightweight aluminum tubing, to 3D forging processes and our TopLock technology, Easton alloy stems integrate careful design choices into the lineup. The EA70 stem is also compatible with the ICM integrated Garmin mount. - 3D Forged EA70 Alloy - Easton ICM direct-mount faceplate computer mount compatible - TopLock Design for easy bar installation - Finish: Black Ano - Weight: 132g (100mm/0) - Rise: +/- 7 degrees - Clamp Diameter: 31.8mm - Steerer: 1 1/8"

Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.

Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 330g - Note: Rustler bars are not compatible with bar ends

Whatever your adventure, Salsa's Salt Flat Handlebars are lightweight, comfortable, and durable. Whether you are racing, riding laps at your local track, or exploring new trail for the first time, grab hold and let’r rip! - Lightweight and strong 7050-T6 series aluminum alloy construction - Signature 11° back sweep, 6° up sweep, zero rise - 800mm and 750mm width options - Graduated ends for easy trimming - 31.8mm clamp diameter with 100mm width for use with Salsa Anything Cradle and aerobars - Weight: 321g - Note: Salt Flat bars are not compatible with bar ends

Riser kits increase stack height to fit a wide range of riding styles for efficient positioning; compatible with ZBS Aerobars, T Plus Carbon Series Aerobars, T Plus Aluminum Series Aerobars, Supersonic Aerobars, Sonic Aerobars, and Subsonic Aerobars. - Multiple kits can be used to reach desired height up to 80mm rise - Raises armrest and extensions together to maintain a comfortable wrist position - Kit includes a pair of risers, bolts specific to riser size, and mounting hardware - Risers are compatible with J2, J3, and J4 Aerobar brackets - Clamp diameter: 31.8mm

Vector is at home in the city or on open roads winding through the hills. A blend of low weight and durability usually reserved for more expensive machines, Vector is the perfect tool for doing whatever you like - whether it’s commuting from work or taking a few extra minutes for a detour in the park. Vector is Orbea's new multi-role bike that emphasizes versatility. A companion for every part of your life. - Lightweight Orbea Urban Speed aluminum frame and fork - Orbea Airline Corsa Disc wheelset - 8-speed Shimano Claris components - Shimano mechanical disc brakes

The Stigmata blurs the lines between free-roading drop bar singletrack slicer and buckled down race-winning gravel machine. It’s designed for the rider lining up for The Big Event, escaping via the road less traveled or who can’t help themselves from finding the hardest way there. Whether your style is baggy or zipped up, the Stigmata is the fast and loose riding partner that’s always ready to rise to the occasion.

Technologically speaking, MX bikes are especially innovative and versatile. The AL6061 frame tubing of the MX is carefully shaped and manipulated to put strength where it’s needed without unnecessary weight. Internal Cable Routing not only gives a cleaner appearance, but also takes advantage of full-length cable housing for great performance with lower maintenance. Most importantly, though, MX is compatible with your riding style. The patented Orbea Digit quick-adjust seat post fits perfectly, and mounting points for racks make increasing carrying capacity a breeze. The sealed headset and BB bearings, replaceable derailleur hanger, and powerful hydraulic disc brakes add up to a bike that is durable, reliable, and flat-out performs. All MX bikes are painted and assembled in the EU and come with the Orbea Lifetime Warranty. - Orbea MX Alloy frame - SR Suntour XCE 28 Coil suspension fork - Mach1 ER20 19 wheelset - 7-speed Shimano Altus components - Shimano hydraulic disc brakes

For the ultimate in comfort and control over long distances, our all-carbon Scully Bar pairs a 5-degree upsweep with a 23-degree backsweep. Featuring an elegant forward bend before sweeping back again, its easy, natural hand position inspires confidence. It’s also blissfully wide, offering loads of real estate up top for mounting lights, bags, bikepacking gear, and more. ISO tested for harsh terrain, the Scully Bar is a sleek and stiff upgrade for paved commutes and whatever off-road riding you’re into — gravel, XC, singletrack, and beyond. Offered with 20mm of rise in two trimmable widths, the ideal fit is out there.

RS RANGE EXTENDER KIT FOR RISE M MODELS Our RS Range Extender mounts to the Rise in seconds and offers a flexible way to add extra range to your rides. CHARACTERISTICS Compatibility Compatible with Rise M Models. Go Further Our RS Range Extender gives you another 252 Wh (70%) offering a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode. Secure Mounting Using our patent pending design, the range extender is securely held in the bottle cage. The cable from the range extender to the standard charging point fits securely and quickly and won't interfere with the pedals. Flexible The RS Range Extender Cage is compatible with water bottles. Our patent pending design, is the first high capacity range extender of over 250 wh, that can be replaced with a standard water bottle in just a second. DESCRIPTION Our RS Range Extender gives you another 252 Wh (70%) for those extra long rides. Adding the RS Range Extender to the Rise gives a range comparable to that of a 900 Wh battery on a normal electric bike. Under typical conditions this means around 8 hours of riding and more than 4,000 m of ascent in Eco mode. SPECIFICATIONS CAPACITY: 252 Wh WEIGHT: 1.4 Kg 70% extr autonomy BOX CONTENTS RS Range Extender Bottle Mount and screws Cable connection to the Rise charging point

We threw in a bit of everything for our take on the ultimate gravel handlebar setup. Rise, sweep, and flare make for an ultra-comfortable handlebar that keeps you in control no matter the terrain. Add the Cruise Control Top and Drop Grips and our Really Long Bar Tape to get to next-level comfort and performance. For the rider that wants to go everywhere, the Kitchen Sink Handlebar is the bar that has everything. With widths from 44 cm up to 50 cm, it's clear we believe in wide. But the added stability and control of a wider bar should not come at the cost of comfort. So we've thrown everything into this handlebar: - 20mm RISE means less pressure on the hands and a broad range of fit options. - 7° SWEEP means the bar is positioned where your hands want to be, whether you're on the flats, the hoods or the drops. - 25° FLARE on a compact drop means a stable, aerodynamic drop position that is actually comfortable enough to use. - Optional endurance loop adds an alternative aerodynamic riding position and a perfect spot for gear storage and mounting accessories.

- Micro Grain Refined (MGR) alloy - 5mm headset spacer included - 2D forged MGR alloy - CNC weight optimized - Shotpeen anodized - Key technologies: MGR, chamfered bar clamp - Material: 2D Forged MGR Alloy,CNC Weight Optimized - Length (mm) : 35 / 50 - Rise : 0 Degree - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): 150 (35mm) / 180 (50mm) - Finish: Shot peen anodized, laser logos

Simply put, it's the perfect trail bar. The M6 bar is tuned for the dream combination of response, compliance, and high strength. Available in a traditional 25mm rise or a low 7.5mm rise, it sweeps back at 9 degrees and up 5 degrees, providing excellent support and a classic fit. Designed around a 31.8mm clamping diameter, the carbon laminate is tuned to deliver the ideal flex profile for trail use. This bar provides excellent vibration damping and response, making it the perfect choice for long days on epic terrain. - Material: Carbon Fiber - Weight: 200g (25mm rise); 190g (7mm rise) - Bar Width (Max): 780mm - Bar Width (Min): 740mm - Clamp Diameter: 31.8mm - Sweep: 9 Degrees - Tip: 5 Degrees - Torque Spec: Face Plate: 5.5Nm - Torque Spec: Controls: 5.5Nm

TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

- For removing/installing cartridge bearings in SRAM X0 hubs and Roam, Rail and Rise wheels

The Terminal Bar blends cruiser-style comfort with off-road touring performance. Able to run with a 40mm drop or rise, its swept-back design makes it great for long rides on rough, technical terrain. - 22.2mm diameter grip area; good to go for MTB shifters, brake levers, and grips - 34 degree backsweep with a 40mm + / - rise

The M5 bar is designed with an offset grip position and 31.8mm clamping surface, the bar can be mounted with a positive or negative rise of 5mm. This versatile bar combines a familiar 9degree sweep with the greater width and strength that's demanded by today's more aggressive XC riders. - Includes decal sheet to color match with ENVE wheel decals

The Atmos 7k stem is a lightweight performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, all fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount. - ±6° angle - Integrated GoPro mount - T25 fasteners for 1 tool across the cockpit SPECIFICATIONS - Stem Angle/Rise: 6 degrees - Clamp diameter: 31.8mm - Steerer clamp diameter: 1-1/8 in - Hardware: Steel

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

Same proven Ritchey quality, performance, and materials now beefed up and available in trail-worthy widths. A shallow rise and gentle sweep are the key attributes of the WCS Trail Rizer bar. The extra-wide grip area allows plenty of room for all components and remotes of choice. - Material: triple-butted 7050 alloy - Width: 800mm - Rise: 20 or 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 31.8mm - Bar-end compatible: yes - Weight: 284g

Ideal for dialing in fit on bikes with tall front ends, the 2x Flat bar can be mounted with positive or negative 5mm rise to achieve the ideal riding position. Constructed of HMF UD carbon, the 2x Flat bar is perfect for race-worthy weight savings on any XC rig. - Carbon monocoque construction - Rise: +/- 5mm - Width: 710mm - Not bar end compatible - Matte UD finish - 183g

TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

The VukaClip is all about providing the ultimate in fit, security, and adjustability for you to be faster and more efficient in your triathlon or time-trial aero position at an affordable price. Redesigned to be easier to set up and adjust, the VukaClip has a large redesigned armrest to reduce pressure points and increase comfort. The VukaClip is made with the industry-standard 22.2mm clamp diameter for maximum versatility, making it compatible with most extensions on the market. Vuka Race Extensions feature 52mm of rise along with a bend that places the wrists at a more natural bend to help riders remain in their tuck to optimize aerodynamics. - Bar-setting fit, security, and adjustability - Compatible with most extensions

Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm - Finish: Matte Black with White Accents

The standard for which Ritchey performance is based on. Race-worthy components priced for the casual cyclist. - Double butted 6061 alloy construction - Gentle sweep for ergonomic performance - Bar Clamp Diameter: 31.8mm - Rise: 5mm - Weight: 276g

A 35mm clamp bar with 20mm and 35mm rise options and 800mm width - 9-degree backsweep and 5-degree upsweep for comfort at all angles - Race model utilizes an engineered carbon layup for ideal trail feel and fatigue reduction - Plus model uses 7050 aluminum for an ideal strength-to-weight ratio - Base Handlebar uses 6061 aluminum

The Stigmata blurs the lines between free-roading drop bar singletrack slicer and buckled down race-winning gravel machine. It’s designed for the rider lining up for The Big Event, escaping via the road less traveled or who can’t help themselves from finding the hardest way there. Whether your style is baggy or zipped up, the Stigmata is the fast and loose riding partner that’s always ready to rise to the occasion.