Handlebar Grips/Tape

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

More support with more comfort Why not combine the best? With the GA3, the winged grip has proven its genius to the All-Mountain world. The special thing about the GP1's off-road cousin is, he locks on tight with a lightweight inner clamp. The concept combines all the relief benefits of the wing and actively supports your wrist. Your freedom of movement and the accompanying bike control remains fully intact. Riding pleasure guaranteed! What exactly are the benefits of the wings on the grips? The longer a ride is, the harder it is for a rider to maintain the ergonomically correct hand position on the bike. As a result, riders often bend their wrists too much, stressing nerves and tendons and inhibiting blood circulation. Numbness and pain in your hands are often the undesirable consequences. The GA3 grip optimizes the hand position through the Miniwings and prevents over-bending in your wrist. What is the carpal tunnel? The carpal tunnel is an anatomic passage in your wrist for nerves and tendons running from the lower arm to the hand. If the wrist is bent too much the nerves become constricted, which often leads to pain and numbness. The GA3 with Miniwing is based on the well-established and proven design of the MTB-specific GA2 grips. The particular shape of the grips provides you with great comfort and grip, without compromising the freedom of movement. This allows you to have all the control you need to tackle the most demanding of trails with full confidence. As an ergonomically perfected expansion of the GA-series by Ergon, the primary purpose GA3 grips is to provide relief out in the trail. But, they're not only perfect for the MTB category, they are also ideal on fitness-oriented and urban bikes. The ergonomic winged-grip GA3 is available in five striking colors. Ergon grips don't just feel great, they look great, too!

The Ergon GE1 Evo Factory is the evolution of the GE1, a popular trail-oriented ergonomic grip for wide riser bars. Thanks to the feedback collected from countless Enduro World Series riders, the Ergon design team improved the GE1 by altering the compound to give a softer, more positive contact. It actively supports the correct torso/forearm position during downhill riding, offering greater control and protecting the sensitive ulnar nerve. Its forged inner clamp and fully integrated grip end connected to the inner core provides a soft, damping grip edge, comfortable right to the outer edge. These grips are compatible with carbon handlebars, so get a pair for race day and everyday.

The original ergonomic grip. The GP1 sets the worldwide standard in ergonomic comfort, materials, and quality. The GP1 eliminates numb hands, aching fingers, and tired forearms. The uniquely shaped grip body is made from 100% German, TÜV-certified rubber compounds of the purest quality – with infused medical-grade white mineral oil for improved flexibility and durability. A forged aluminum clamp allows the grip to be adjusted for perfect fit, can be easily readjusted, and eliminates twisting once installed. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: 100% recyclable aluminum

The Ergon grip with a 2-finger, mini bar end, delivers more hand positions and improved leverage and stability when climbing or during out-of-the-saddle cycling. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP Series, the GP2 eliminates numb hands, aching fingers, and tired forearms. The GP2 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Uses: mountain biking, touring, commuting - Clamp: fiberglass composite with rubber inserts

The Ergon grip with a 3-finger bar end provides a wide range of use, ranging from mountain bikes to fitness to touring bikes. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP3 eliminates numb hands, aching fingers, and tired forearms. The GP3 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Carbon bar compatible - Clamp: fiberglass composite with rubber inserts - Uses: touring, commuting

The Ergon grip with a full size, multi-position bar end for maximum hand positions, increased leverage, and stability when climbing or during out-of-the-saddle cycling. Perfect for commuting, touring, or for those who like a longer bar end. The bar end angle can be adjusted independently from the angle of the grip for the perfect personal fit and the bar end doubles as a clamp to lock the grip in place and prevent movement while riding. Like all the grips in the GP-Series, the GP5 eliminates numb hands, aching fingers, and tired forearms. The GP5 is made from 100% German, TÜV-certified rubber compounds of the purest quality. - Not suitable for use with carbon handlebars - Uses: touring, commuting - Clamp: fiberglass composite with rubber inserts

The GS-grip combined with a compact 2-finger bar end made out of fiberglass reinforced composite, which offers more hand positions for increased comfort on long mountain bike rides. Additional rubber is used on the bar end improving the rider's grip during hand position changes. The exclusive German-produced rubber compound found in the grip and on the bar end enables precise steering and control, all while still maximizing optimized damping features. The grip provides ideal comfort over long distances through ultimate pressure distribution and ride-tuned flex. - Carbon bar compatible - Uses: mountain bike, marathon, XC

Recommended for grip shift and riders looking for the best shock absorbing grip in the industry. 60 grams, standard grip length - 5 1/8", installed DIA. 32mm, weight plus or minus 5%, 1 set of bar plugs included. - 60 Grams - Standard Grip Length – 5 1/8" - 32mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

The ESI Extra Chunky grips are the thickest available. 80 grams, standard grip length - 5 1/8", installed DIA. 34 mm, weight plus or minus 5%, 1 set of bar plugs included. - 80 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 34mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Our softest and thickest grips for every type of cyclist! These Plush Silicone Grips add comfort to any handlebar. The soft Silicone absorbs vibration and keeps your hands comfortable on long or short rides. Since they are made from 100% Silicone they will not fade, crumble or spin. They are non porous and stay tacky when wet. Soft grooves add extra grip and will keep your hands comfortably in place. These long lasting and comfortable grips are an affordable upgrade that will bring comfort to all of your rides! - Fits most handlebars - Made from 100% Silicone - Latex & Rubber Free - Made in the USA - 35mm thickness - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation - From the makers of ESI Grips

Best suited for the acknowledged weight weenie and thin grip lovers. 50 grams, standard grip length - 5 1/8", installed DIA. 30 mm, weight plus or minus 5%, 1 set of bar plugs included. - 50 Grams - Standard Grip Length – 5 1/8" - Installed Dia. 30mm - Weight plus or minus 5% - Made for 22mm bars (can fit applications down to 19mm) - Bar Plugs included - *Install Bar Plugs first for the protection of grips and ease of installation

Keep adhesives off your bike! This is the finishing tape included in our RCT Wrap Kits. If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself or to our silicone grips, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products. BENEFITS: ESI Silicone Tape has some of the same benefits as our grips. It is heat resistant, made in the USA, and long-lasting. Not to mention it's military-grade! - Easy to Install - Hassle Free - Self-Bonding - No Residue - No Adhesives - UV Resistant NO CLEAN UP: The best part of our tape is when you are done with it, cut it off, and throw it away. No Clean up needed! USES: There are countless uses for our silicone tape. One awesome use is it makes a great chainstay protector. Also, wrap it under mounts to keep your lights, cameras, GPS, etc. from rotating and scratching your bars. Basically, anything you use adhesive/electrical tape on you can now use ESI Silicone Tape instead without the mess. With 10ft in a roll, you can get numerous chain stay protectors and custom tape jobs. Some other great uses include: - Tool Handles - Finishing Tape - Protecting Wear Points - And Much More The possibilities are endless!

Double Gel Cork tape pairs an extra layer of gel padding with classic, long-lasting cork for handlebars that feel comfortable and look timeless. It's easy to install, looks great, and feels even better. - Ideal stretch for quick and easy installation - Features twice the amount of gel for maximum comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing - Double Gel Cork Tape has a thickness of 3.0mm

This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

Key features: - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

- Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing;Bright color provides added visibility - Gel Cork Tape has a thickness of 2.7mm

- Grippy texture for consistent no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam for added comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing

Bar end plugs (2)

Bontrager's Microfiber Tape gives you a no-slip grip on your bars. It's super lightweight, and ultra-thin for that nice, close-to-the-bar fit. The adhesive backing makes installation a breeze. It includes a set of Bontrager reflective bar end plugs and finishing strips as well.

Super tacky (in a good way) Confidently ride in all conditions with the no-slip grip of our Perf Line Handlebar Tape. This tape adds an extra layer of comfort with shock-absorbing foam, and keeps your bike looking classy and sleek with perforated details and a thinner profile. Handlebar tape with extra-tacky texture, classic perforation, and a thinner profile that lends a better grip on road rides. - Super-tacky texture offers a no-slip grip - Classic perforated styling adds texture and looks clean - Ideal stretch allows quick and easy installation - Shock-absorbing foam elevates comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing simplifies installation - Thinner profile for a sleek look

Made with recycled materials, this lock-on grip with a unique tread pattern and thick profile adds comfort and control on technical trails. Lock on to the trail Confidently handle any trail with the SE Elite Recycled Grip made with recycled plastics in the core. This lock-on grip uses clamps to secure the core for a tight hold in any terrain, while a unique opposing tread pattern provides the perfect amount of traction and padding for your palms. Using recycled materials in this product helps provide second life to unwanted end of life plastics. Product details - Grip core is made from recycled plastic - Opposing tread pattern absorbs shock in palms and increases grip at fingertips - Rubber compound provides confident grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 32mm diameter - Length: 130mm - Weight: 115g Features: The net effect Fishing nets make up an estimated 10% of all plastic in the ocean. What's even worse is that they're 4 times more harmful to the ocean environment than all other forms of plastic pollution. A global issue Each year 18 billion pounds of plastic enters the ocean, polluting beaches and waterways around the world. Better products for a better planet We're committed to lightening our footprint and designing for circularity wherever possible. This product and others contain recycled material and are made using planet-friendlier manufacturing processes.

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition. The 90mm width of these grips accommodate twist shifters.

Take care of your hands with an ergonomic, paddle-shape design that evenly distributes pressure across your hands and helps reduce hand fatigue. The Satellite Elite Grip features a dual-density compound that offers variable padding and unparalleled vibration absorption to ensure comfort on every ride. Key features - Dual-density compound design provides secure grip, control, and comfort - Contoured design comfortably supports palm to decrease fatigue - Lock-on clamp securely holds grip core to bar, eliminating slipping

A dual-density lock-on grip with an ergonomic design and IsoZone vibration damping for all-purpose comfort. - Integrated clear gel adds comfort and shock absorption - Dual-density compound design provides secure grip, control, and comfort - Contoured design comfortably supports palm to decrease fatigue - Lock-on clamp securely holds grip core to bar, eliminating slipping

Remain confident in your grip and keep riding through all weather conditions with the Supertack Handlebar Tape. • Super tacky texture for no-slip grip • Ideal stretch for quick and easy installation • Shock-Absorbing foam for added comfort • Finishing strips and reflective Bontrager bar end plugs included • Adhesive backing • Microfiber

Your hands aren't going anywhere Your grip is the last thing you should be thinking about while turning the pedals. Ride through all weather conditions with confidence thanks to the no-slip grip Supertack Handlebar Tape. Shock-absorbing foam adds an extra layer of cushion for comfort on long rides, while a thinner profile keeps your bike looking sleek. Handlebar tape with extra-tacky texture and a thinner profile for a sure grip on road bike handlebars. - Super-tacky texture offers a no-slip grip - Ideal stretch for quick and easy installation - Shock-absorbing foam elevates comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing simplifies installation - Thinner profile for a sleek look

- Silicone foam blend provides excellent grip and shock absorption - Simple design maximizes durability and minimizes weight - 32mm diameter