Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Brakes/Levers/Pads

Our floating discs have been redesigned with a wider braking surface to enable them to be used as a replacement on many other braking systems in addition to our own FEATURES - Constructed in two parts, aluminium centre and stainless steel braking surface. - High performance disc, allowing the stainless steel outer to expand separately from the centre and handle high temperatures without warping. - Hope floating rotors have a true floating design which allows 1 degree of freedom. This means the outer is always free to expand when subjected to heat. - Lightweight design. - Aluminium centre acts as heat sink keeping disc temperatures lower. - CNC machined centre is stiff and lightweight so has the advantages of a thicker fixed disc without the weight penalty.
Round edge braking surface. Custom steel braking surface riveted to an aluminium central carrier. Standard 6 bolt fitting. Available in: 160mm only. Floating design deals with changes in temperature. Available in our six colour options. Weight: 115g. **IMPORTANT NOTICE**Please ensure you have sufficient clearance to use this rotor, pay attention to any possible interference with caliper mount, frame, etc. KEY FEATURES - Round edge braking surface - Custom steel braking surface riveted to an aluminium central carrier - Standard 6 bolt fitting - Available in: 140mm & 160mm - Floating design deals with changes in temperature - Weight: 115g - Available in black, silver, bronze, red, blue, purple & orange
$0.50
Hope Pad Clip - Fits Tech and Tech Evo M4, X2, and V2 Brakes
$1.90
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
$1.90
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
$2.50
Brass compression olive for Hope hydraulic disc brakes.
$4.28
Brass hose insert for Hope hydraulic disc brakes.
$4.95
Hope 5mm Standard Hose Kit with Fittings for Hope Brake
$20.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks. KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork *NOTE: Will not work with most Post Mount Marzocchi forks* - Weight from: 20g - All mounts come with bolts to fit to fork/frame - A wide selection to fit most combinations - CNC machined
$21.00 - $25.00
All our brake pads are designed and dyno tested in-house at Barnoldswick All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity We keep a wide range of pads to suit all our brakes Almost all our brake pads are available in sintered or standard compound options All our brake pads come with the necessary hardware
$21.00 - $25.00
Pads available in a range of compounds for all Hope brakes - whatever the age. All pads are designed and dyno tested in-house at Barnoldswick. Available in Race, Standard, Sintered and Road compounds KEY FEATURES - Choice of Race, Standard or Sintered compounds for all MTB brakes. Road compound available for RX4+ calipers. - Brake pads include spring clip and pin - Brake pads are dyno tested in-house in Barnoldswick - Available for all our current brakes and older models - All pads are rigourously tested by us and our Pro riders to ensure maximum performance and longevity - We keep a wide range of pads to suit all our brakes
$25.00
Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes
$25.00
Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts
$25.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks. KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork *NOTE: Will not work with most Post Mount Marzocchi forks* - Weight from: 20g - All mounts come with bolts to fit to fork/frame - A wide selection to fit most combinations - CNC machined
$25.00
Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts
$25.00
Our mounts are all CNC machined to offer precise fitting to most frames and forks. KEY FEATURES - We hold a wide selection of caliper mounts to fit perfectly with our brake systems - Most of our mounts are available in a choice of black or silver - Brake mounts are machined from T6 2014 alloy - We have designed the brackets only for the purpose stated - All mounts are supplied with bolts for mounting to frame/fork *NOTE: Will not work with most Post Mount Marzocchi forks* - Weight from: 20g - All mounts come with bolts to fit to fork/frame - A wide selection to fit most combinations - CNC machined
$35.00
Hope Brake Line kits · Works for front or rear · Fits All Hope Moto, Mono, Tech, Tech Evo and Mini Series Brakes · Length is 1500mm
$55.93
Hope Brake Line kits • Works for front or rear • Made for Hope by Goodridge • Fits most manufacturer's disc brakes • Braided stainless steel line • Hose length: 1600mm • Hose OD: 6mm • Hose ID: 2.4mm
Page 1 of 1