Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in—but doesn’t let water out. - Capacity: 26oz (768 mL) - Construction (Versa Mounting Plate): 16-layer unidirectional carbon fiber - Construction (Cage): Carbon Torpedo Cage - Construction (Computer Mount): Nylon Composite - Construction (Bottle): Lead free, BPA-Free and HDPE food-safe certified bottle - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 8.4oz (240g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 35oz (1035ml) - Width: 65mm-140mm (center to center) - Weight: 35oz (470g)
The FC System was designed with one thing in mind: to bring together the most compelling details into one all-inclusive hydration system. - Streamlined Storage: New Profile Design FC Hydration Systems were designed with one thing in mind to create a clean front-end solution that thoughtfully integrates hydration, nutrition and electronic needs. Integrated storage streamlines nutrition needs into rear airfoil compartment. - Forward Computer Mount: Computer mount positions perfectly at the front of the system for optimal viewing. - Sealed cartridge bearings - No-Splash Refill Port: Brand new patent-pending refill port shields splash back. - Dual Straw Positioning: Strategically flexible to fit your preferences. A simple turn of the dial positions straw on the right or left side of the bottle. - Convertible Straw: Swap straw with gap cap to place straw in the front or rear of bottle. Specs - Construction: BPA-Free, Foodsafe HDPE Bottle - Capacity: 25oz (739ml) - Width: 65mm-140mm (center to center) - Weight: 250z (397g)
Quickly and efficiently take care of your aero hydration and computer holding needs with the Bontrager Speed Concept carbon Computer Cage. It allows bottle access while maintaining aero position and also incorporates an integrated bike computer mount. • Carbon fiber cage construction • Designed to be mounted to the Speed Concept Mono Extensions • Adjustable track mount system can mount to standard water bottle spacing and adjusted for perfect placement • Securely holds standard water bottles • Integrated computer mount will accept standard bar-mounted computer mounts • Adapter for SRM computer mounts included
• AERODYNAMIC LOCATION - Mounts to saddle, hiding in body’s draft • HIGHLY ADJUSTABLE - Can adjust cage angle and cage height for a perfect custom position • STABLE DESIGN - Stiffest mount on market with alloy arms • FLARED CAGE DESIGN - Makes inserting bottle easy • HIGHEST GRIPPING CAGE - 14 lbs grip on bottle to prevent bottle launches • ANTI-VIBRATION - Locking hardware for safety and security • REPAIR STORAGE OPTIONS - Compatible with AERO POUCH 300 BAG or MULTI-STRIKE REPAIR HOLDER (each sold separately) • Aircraft aluminum mount • Carbon fiber bottle cage • Weight: 141.5 grams Why single rear carriers? • Replaces frame bottle: Standard frame-mounted bottles have high aerodynamic drag, so place your bottle at the rear instead. The DELTAs are mounted on the saddle rails for no measurable drag. • Refills front drink system: Use the DELTAs to refill a front drink system. Just bring the spare bottle forward from the DELTA and refill. If you have the popular XLAB TORPEDO aerobar mounted system (sold separately), then simply replace the empty front bottle with the spare bottle from the DELTA. • Adds an extra bottle: These systems are also ideal for longer training rides or century rides, where an extra bottle is necessary so you can have your favorite mix with you at all times.
The Delta 425 is among the lightest and stiffest, adjustable single rear bottle carriers on the market. Compatible with ISM saddles. The Delta 425 mounts to the saddle rails and hides in the body's draft. Angle and height are highly customizable for that perfect fit. It includes a tight-gripping Gorilla XT carbon fiber cage for a secure hold.
- Complete packaged system containing all essential items for training and Sprint race distances • Includes the key -items for training - Includes essentials you need for short triathlons - Supplies your hydration, nutrition, and repair storage needs along with inflation accessories Includes: - TORPEDO SYSTEM 50: Refillable 26 oz aerobar mounted hydration system. No tools required for installation. - STEALTH POCKET 100: All-purpose nutrition & repair top tube storage bag accommodating most bikes - NANOFLATOR: Easy to use inflator, with a twist to inflate function, for controlled inflation - AIR STRIKE CO2 cartridge: One 16 gram CO2 cartridge
High-performance simplicity. New carbon design leverages the groundbreaking, award-winning design of the Torpedo Kompact 100 for an even lighter weight, sleeker and more rough-road durable hydration system. - NEW unidirectional high-modulus carbon mounting plate - Includes NEW high-grip carbon Raptor Cage, color-customizable to suit your setup - Just add your choice of beverage: Includes hyper-reflective Cool Shot bottle to keep liquids super cool - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubber bands or electrical tape needed to secure system: SecureClip brackets simply clip on and Velcro down to aerobars - On top Garmin computer mount gives quick-glance bird's-eye-view of your cycling data All Inclusive System - Comes with everything you need – mounting plate, Garmin-specific computer mount, cage and bottle No-Fuss Installation - Torpedo Kompact 500 comes fully assembled - No Zip-ties, rubberbands or need to concoct your own mounting solution required – simply click-on and Velcro-down - XLAB SecureClip brackets eliminate rattling and shifting. Fits 22.2mm diameter aerobar extensions. \ - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface (check Compatibility tab for specifics) Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Kit-Match with a Color Customizable Cage: - Color match your bike kit! Insulated Bottle - Hyper-reflective Cool Shot insulated bottle keeps liquids super cool Highest Bottle Grip of Kompact Series - 6 lb grip force is durable for rough road conditions: Carbon anti-launch design increases grip force - Capacity: Includes 20oz (600ml) XLAB COOL SHOT insulated bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 154.4g (without bottle or computer) - Length: 145mm - Bottle Grip Force: 7lbs Construction - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Carbon - Cage: Carbon chassis, polycarbonate RAPTOR TALON cage ends - Brackets: Nylon Composite with Velcro Straps coated with no-slip extension grip
Profile Design's Aero HC Hydration System sports a sleek, aerodynamic design so you can stay hydrated and hidden from the wind. The bottle features an aerodynamic design and a removable nose so you can easily clean it.The integrated mount places your computer right where you can see it when you're in an aero tuck. With 35mm of width adjustment and independent fore/aft adjustment for the bottle cage, the Aero HC Hydration System is a key part on your aero bike.
Zipp's SL Speed Carbon Bottle Cage features an ultra-light (18g) design engineered for flexibility and strength. Optimized for both side and direct bottle entry the SL Speed cage provides easy access to hydration, especially on smaller bike frames and those with tight angles. Thin-but-strong arms flex for easy bottle insertion and removal, at any angle.
Designed and engineered specifically for the Vuka BTA mount, the Zipp Vuka Carbon BTA bottle cage is constructed completely from UD carbon fiber, for low weight and strength, as well as super secure bottle fitment. It's engineered to virtually eliminate bottle launch.
A cage that won't slow you down This OCLV carbon fiber cage is so lightweight you'll hardly know it's there. (That is, until you reach down and remove your water bottle with ease.) Recommended for on-road use with small water bottles. - Strong and lightweight OCLV Carbon construction - Secure bottle retention designed for road bikes - Recessed bolts allow smooth bottle transition and better derailleur clearance - Includes lightweight alloy mounting screws - Weighs only 20g
Classic Design: the handlebar-mounted aluminum bottle cage has the same classical shape as historic ones. Finish: the bottle cage is made in opaque, satin-finished aluminum where the EROICA logo is carved, for an instantly recognizable product. Firm grip on the bottle: the bottle cage features a lever-closing system that holds the bottle steadily even on the dirt roads where many classic cycling competitions are still being held. It can also be adjusted based on the bottle diameter, so you can use bottles that range from 70 to 78mm in diameter. Easy to use: it's pre-assembled, needs no specific tools and includes all the screws you need to install it on the bicycle. Available in the single (one bottle) or double (two bottles) versions
Wind-tunnel testing shows that a bicycle with XLAB's Aero TT Cage and Bottle System on it is 25% more aero than with a round bottle, meaning it will shave up to 20 seconds off a 40K bike leg or time trial. The high grip cage holds the bottle securely, and the non-slip surface with an easy-grip groove makes it easy for you to get the bottle out. The included XLAB 20-ounce aero bottle is BPA-free. - NEW! Stealth black bottle color. Match your black Torpedo Bottle or kit-match your bike! - Carbon cage securely grips bottle - Save up to 64 seconds on Full Race distance - 50% Less Drag than round bottles - Special XLAB Hi-Grip Deep Pocket carbon cage
Zipp's Vuka Alumina BTA Mount with QuickView is cleverly designed to sit between the arms for aerodynamic efficiency while riding. The 104-gram, rock-solid aluminum mounting frame includes a QuickView quarter-turn mount for all Garmin Edge series head units, and is compatible with Zipp's Vuka BTA Carbon Water Bottle Cage (each sold separately). Mounting hardware is laser etched with a precision alignment scale, allowing wide-range adjustability so you can focus on the road ahead.
XLAB's Gorilla XT Carbon Cage is perfect for mountain bikes, rear-mounted carriers and other high-stress hydration situations. The XT has over 4 times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit. It boasts an amazing 14-pound grip force on bottles.
Carbon BTA hydration mount compatible with Torpedo Versa (sold separately). 16-layer carbon fiber plate ensures a no-rattle, no-bounce ride. Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 16-layer unidirectional carbon fiber - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
XLAB's Chimp Carbon Cage weighs only 36 grams and firmly holds your bottles in place, even over bumpy terrain thanks to 5 pounds of gripping force. It's specifically designed for use with tri bikes and other aero rigs with smaller front triangles that make grabbing bottles from ordinary cages difficult. The Chimp Cage's 30-degree cutoff lets you pull your bottles out at an angle for improved ease of use. Plus, this light carbon cage grips great and has supportive top and bottom tabs so you'll never lose a bottle.
XLAB's Gorilla Carbon Cage is one of the most popular rear bottle cages on the market! It boasts an amazing 7-pound grip force to keep bottles in place on bumpy roads and it's been specifically tweaked to work perfectly with saddle-mounted cage carriers. The Gorilla has over two times the gripping force of conventional carbon cages thanks to its 6 carbon gripping fingers, its top and bottom retention tabs and thicker carbon construction. And, it's still easy to slide your bottle out and grab a drink even when you're pushing it to the limit.
$59.95 - $64.95
Having trouble getting your bottle out of your cage? Upgrade to XLAB's Sidekick Carbon Cage! It's specifically designed for use with aero frames, tri bikes and other rigs with small front triangles. Plus, its side-loading design lets you slip your bottle in and out at a comfortable angle so you won't have to struggle with a stuck bottle ever again. It's also crafted from carbon for an impressive weight of only 34 grams. And, it boasts a whopping five pounds of grip force so it keeps bottles in place over even the roughest pavement. - Ideal for fastest frame bottle access and for small frames - Low cut sides for rapid bottle removal and insertion - Wide center opening permits sides to flex outwards for easy bottle withdraw - Special flared entry lip for fast bottle access and insertion - Long thick lower shelf prevents large heavy bottles falling through cage bottom or breaking off tab - Matches XLAB Gorilla cages rear carrier Anti-Launch, and Chimp cages
XLAB's Torpedo Carbon Cage is designed specifically for their horizontal aero bar hydration mounts. Use with a standard bottle or XLAB's new Torpedo model (mounts and cages sold separately). The cage is made of ultra-light carbon, holds bottles securely and is super easy to use. It features a 5-pound grip force on bottles so they stay put over even the roughest roads.
Lezyne's Road Drive Carbon Cage is a lightweight cage made of FCT carbon fiber with optimized architecture for accommodating a wide range of bottle shapes and sizes. The strong cage ribs, top catch and bottom bridge are designed to increase cage strength and grip, preventing bottles from ejecting. A pump bracket is integrated into the cage body. With the included Velcro strap, a Road Drive pump can be held securely in place. The low profile design and ovalized mounting holes allow this cage to fit on both small and large frames.
Torpedo innovation meets vertical bottle design. Brand new 28-ounce (828mL) hydration system with minimal frontal area. Includes composite mount and clamps, splash-proof lid over quick-fill opening, straw with bite valve, and Hydroblade bottle. All-in-one system for one great price! The Hydroblade is for casual mountain biking with front suspension forks. The most convenient, complete vertical hydration system available. - Safer riding - no reaching down for your bottle - Easily refuels. Simply lift lid and fill using wide mouth, quick-fill opening - Bite valve keeps straw full for quick drinking - Comes complete with easy clip-on clamps for triathlon and TT Bars - Mount the Hydroblade on MTB, fitness, drop or flat bars using the Hydroblade Universal Mount, available separately. - Fits widest range of bars – 80-160mm (center-to-center) Easy to Drink and Refill - Hands-free drinking. Simply sip from the straw, keeping your eyes on the road ahead. - NEW ClickCover! ClickCover designed with grippy pull-tab for opening. Simply pop open and refill via Split Cap. Insert bottle nozzle into aperture for fast, quick refill. - Comes with two cap styles! System also includes highly-acclaimed classic Torpedo Clear Cap. Wide mouth, quick-fill opening also makes mid-ride refill of tablets or powder a breeze. - Top-of-the-line bite valve decreases bloating by reducing air intake when sipping - Flat bottom allows bottle to stand upright on counter when filled Clean, Aerodynamic Design - Computational Fluid Dynamics (CFD) optimized aerodynamic shape to minimize system drag - Flow straighteners molded in for added drag reduction Highly-Acclaimed Megadjust Mounting - Securely adjusts to widest range of cockpit configurations 80mm-160mm (center-to-center) - Accommodates up to 20° of aerobar extension rotation SecureClip Brackets - Clips onto aerobar extensions for a clean bike aesthetic. Eliminates need for extra zip-ties, rubber bands or electrical tape to prevent rocking or tilting - Fits 22.2 diameter aerobar extensions
Torpedo System 50+ is the perfect refillable aerobar hydration system for the beginner triathlete. Unbeatable price + top features outshine any competitive choice. Includes: - Bottle and Bottle Accessories: Bottle, Straw with Bite Valve, Slotted Lid, Spare Straw Hole Plug - Nylon Composite Vee Cage - Aluminum Torpedo Mini Mount - Mounting Accessories: (4) XTS Mounting Straps Easy to Ride - Stop reaching down to frame bottles for a drink. Keep both hands on the aerobars and simply take a drink from a straw positioned directly under your mouth. Easy to Drink & Refill - 2 possible straw locations to customize your setup - Drink Valve makes drinking even faster by keeping fluid ready near top of straw. - Split Refill Lid allows for easy refilling while on-the-go. Wide diameter allows for on-course Aid Station Bottles for easy mid-race refills. - No lid to flip out of the way, just simply put the full bottle into the easy access split refill hole. Easy to Clean - One-piece body ensures no leaking! - Bottle made in the USA and is lead free, BPA-Free and HDPE food safe certified - TRUE 26 oz bottle capacity (768 mL) Quick Install - Adjustment width fits bars 80mm – 130mm (center-to-center) - No tools required for fast installation and removal. Simply loop straps around aerobar extensions and tighten. Easier to Handle in Winds - Bottle designed to mount further back allowing easier steering for the rider No Need to Sacrifice Aerodynamics Even at the Entry-Level - Aerodynamically Invisible bottle design used by all XLAB Torpedo Systems - Contoured design to fit your arm shape. - Small frontal area that allows a clean airflow around the bottle - Kamm tail. Reduces drag by 50% - Airflow straighteners designed into the bottle to gather airflow for a clean, straight exit air flow
This rear-mounted hydration system holds two bottles and attaches directly in front of seatpost for easy hydration on the go. - Full angular adjustment allows bottles to be rotated - 6061-T6 aluminum construction - Brackets included to mount two Co2 cartridges - Fits 31.6mm to 27.2mm seatpost with shims (included) - Includes two cages and 6061-T6 Aluminum clamp and extension
Keep your hydration right between your arms and your computer at a glance. Easy-to-install system stacks hydration and ride data into one simple design. - Upgraded computer mount takes on rougher road conditions. 3X stiffer than original Kompact 100. - Just add your choice of beverage: Includes calibrated, squeeze-and-squirt Aqua-Shot Racing Bottle - SecureClip Brackets Install in an Instant: No ugly cable-ties, rubberbands or electrical tape needed to secure system: SecureClip brackets simply 'clip on' and Velcro down to aerobars - On top Garmin and Wahoo computer mount gives quick-glance bird's-eye-view of your cycling data - High-grip design holds bottles tight – yet bottle insertion and removal is easy All Inclusive System - Comes with everything you need – mounting plate, Garmin and Wahoo computer mount for Garmin bike computers or multisport watches, cage and bottle No-Fuss Installation, Comes Fully Assembled - No Zip-ties, rubber bands or need to concoct your own mounting solution required – simply clip-on and Velcro-down - Clean, 'snap' on XLAB SecureClip brackets eliminate rattling and shifting - Megadjust means the widest adjustment range available, fitting aerobars 70mm-150mm (center-to-center) apart Data Right Where You Need It - Designed for easy placement of Garmin bike computers, Garmin Forerunner and Fenix watches w/ Simple Quarter Turn interface, and Wahoo bike computers Rear Offset Design - While bulkier systems limit hand placement and force your hands into limited pockets – the short, compact design (just 145mm / 5.7in) clears the aerobars for more, comfortable hand positions - Reversible design easily allows for repositioning if you'd rather pull the bottle towards you than away. - Perfect for shorter aerobars – rear offset design moves bottle weight over stem and doesn't require a significant amount of space from your aerobars - Improves bike handling compared to systems that load weight onto aerobars Easy Glide Cage Design - Specially designed side cutouts enable fast bottle withdraw and entry. Available in black or red Drink Fast with Self-Sealing Nozzle - No need to open bottle nozzle with your teeth. Simply stop squeezing and the nozzle seals itself. - Compatibility: Wahoo and GARMIN-specific - Capacity: Includes 25oz (740ml) clear AQUA-SHOT bottle - Adjustment Range: 70mm-150mm (center-to-center) - Weight: 177g (without bottle or computer) - Length: 145mm/5.7 inches - Bottle Grip Force: 4lbs Construction - Bottle: Clear, lead free, BPA-Free and HDPE food safe certified bottle - Mounting Plate: Aluminum Alloy - Cage: Nylon Composite VULCAN CAGE - Brackets: Nylon Composite with Velcro Straps coated with non-slip extension grip Warranty: - 2 Year Limited Warranty
- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)
The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.
Fit for fondos, ready for races The carbon construction of the Pro Carbon Water Bottle Cage provides climbers with a lightweight solution that securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes and available in a multitude of colors to suit your style. - Full carbon construction - Secure bottle retention suitable for road and mountain use - Includes lightweight alloy mounting screws - Available in a variety of colors - Weighs only 29g
The full carbon construction of the RXL Carbon Cage provides climbers with a lightweight solution while the robust design securely holds bottles over train tracks, rough roads, and rocky terrain. Ideal for both road and mountain bikes. Key features: - Full carbon construction - Suitable for road and mountain use - Includes alloy mounting screws - 23g
Innovative design with side and bottle insertion/removal - Carbon injection bottle cage - Extremely light, 25 grams - Compatible with all frames, ideal for sloping tubes or small sizes
Low-cost nylon composite mount with NEW Italian-made cage. Featuring 60% more grip force than original model! - Single bottle system neatly tucks one bottle behind your saddle for easy access to hydration - Perfect location for an extra bottle when taking on longer training rides or Century rides - Mounts low to not hinder your ability to get on and off the bike - Carry repair kit with XLAB Multi-Strike Repair Holder Ideal for first-time rear hydration system buyers - Ergonomically designed so you can easily access the bottle even with limited flexibility - Low mounting position provides enough clearance to easily swing your leg over the saddle - Adjust bottle height by up to 1" to perfectly position to your comfort level Worry-free bottle security - High-gripping XENON cages tout approx 8lbs (3.6 kg) cage grip force – within the ideal range of rear system grip force for worry-free bottle retention - Strong, sturdy mount prevents swaying, rattling and vibration Easy storage upgrades readily available - Add an XLAB Multi-Strike Repair Holder – a compact storage bracket that sleekly mounts behind the cage! - Multi-Strike Repair Holder easily carries a clincher repair kit – tube, tire levers, XLAB Air Strike CO2 Cartridges and XLAB inflator. It can also carry a full tubular setup including tubular tire and inflating foam sealant.
Profile Design's Aero HC Bottle features an aerodynamic design so you can stay hydrated without sacrificing your position or speed. A flip up cap means easy refilling on the go, and the removable nose makes it easy to clean the bottle after the ride. The straw shroud is aero as well, so nothing about this exceptional piece of kit will hold you back in your quest against the clock.
An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable
New Torpedo Bottle and essentials to reload your Torpedo System, or upgrade to the new Anti-Leak Design. Includes: Super-Sealed TORPEDO Bottle, Straw, Drink Valve, Solid and Split Lids, Leak-Free Breather Valve, Dolphin Tail Straw Retainer and Hardware.
The Aero HC Bracket Kit from Profile Design lets you attach a water bottle and computer mount in between your aero extensions. It fits aero extensions from 85mm to 120mm wide so you can use the bars of your choosing.
Kit-match with a new customizable high-grip carbon cage! Customize Your Cage Colors - Personalize your look with Raptor Talons available in multiple colors - High-grip carbon cage with approx 6lbs grip force - Svelte design for a streamlined look - Weight: 1.0oz (30g) - Pair with the hyper-reflective Cool Shot insulated bottle Grip Force - Approx 6lbs grip force for excellent bottle retention Optimized Carbon - Unidirectional carbon inside and 3K carbon weave outside Ideal Uses - Road - Triathlon (Aerobar and Frame) - Gravel - Mountain - Weight: Approx 30g (1.07oz) - Grip: Approx 6lbs - Construction: Carbon Fiber - Includes: Corrosion resistant Black Zinc screws - Warranty: Limited 3 Year
- Stainless steel cage with a black vinyl coating - 5" Outer diameter cage velcros on any size frame tube or seat post - Will not scratch metal bottles or remove paint - Not recommended for glass - Proudly made in chicago, Illinois
Aluminum BTA hydration mount compatible with Torpedo Versa (sold separately). Pre-drilled front mounting holes for Torpedo Versa or aero computer mounts. - Adjustment Width: 75-150mm - Construction (Plate): 6061-T6 Aluminum - Construction (Brackets): Nylon composite with Velcro straps coated with no-slip extension grip - Weight: 1.9oz (55g)
• Constructed of impact resistant Nylon • Carry lightweight roundish objects such as insulated Nalgene bottle holders, thermoses, Gatorade jugs, small dry bags, and ultralight sleeping pads and shelters • Mounts to water bottle cage mounts via Salsa’s Three-Pack pattern • Includes two nylon straps • Cargo Weight Limit: 6.6lbs (3kg) • Cage Weight: 149g
Topeak's iGlowCage will turn your night ride into a wild adventure! Ingenious integration of a super bright RGB LED into our water bottle cage gives you multiple choices of color to illuminate the included clear bottle for 360 degree visibility.
With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).
Keep your water cold 4x longer! We re-engineered our legendary Podium Ice to be the ultimate insulated cycling bottle, even when temps rise into triple-digits. With unmatched aerogel insulation technology, high flow rate, and easy cleanability, the Podium Ice stands second to none. And like our entire Podium collection, it's 100% free of BPA, BPS and BPF and features improved cage fit and the squeezability that CamelBak is known for. - Aerogel Insulation: Keeps water cold 4x longer than other bottles - Optimized Cage Fit: Engineered to securely fit in a variety of bottle cages - Easy Squeeze: Get more fluid with less effort - High Flow, Self-Sealing Cap: Maximizes flow rate while eliminating splatters and spills - 100% free of BPA, BPS and BPF: Ride clean, drink clean - Easy-to-Clean Interface: All parts can separate for thorough cleaning - Positive Lock out: For leak-proof transport - Trutaste Polypropylene with Hydroguard: Taste your water and nothing else, time after time.
Hey mang! I'm Flasky! You know, where ever I go people are always saying to me “Flasky, you're a good friend. You keep me warm when I'm cold, loose when I'm tight, and twirling when I should be sleeping.” Hey, I try! But I want people to know how tough I am! Not even a dog can hurt me! Well maybe a dog could, I don't know, like if it was maybe a pit-bull or something. Especially an alcoholic pit-bull who hadn't had a drink in a while. But still, I'm pretty tough cuz I'm stainless steel. I don't rust and I don't trap flavors like plastic. That way your gin don't taste like your juice. I'm a good size too; more than enough but never too much, except sometimes. So yeah, that's me. Let's go for a ride. Right now. C'mon, don't be stuck up. - Stainless steel. 6 oz (177ml)
The Happy Can from BiKASE is a convenient handlebar/stem mounted drink holder or general purpose stash sack. Using a few hook and loop straps, the Happy Can mounts between your handlebar and stem so you have easy access to your beverage or other items. - easily connects to handlebars and stem using 2 Velcro straps - securely fits cycling water bottle or other bottle sizes - perfect to use as a small storage bag for snacks or phone - mesh side pocket - rain fly with draw string to secure water bottle on bumpy rides
$19.99 - $24.99
Modern mountain bikes' fancy suspension and lower standover height have put water bottle cage real estate at a premium, but Blackburn's Wayside Side Entry MTB Cage buys back some space! - Left or Right Handed - This 2 piece system can be installed so that the bottle is able to exit from either the right or left side. No extra hardware is required and the cage installs easily and quickly. - Bottle Retention - There is nothing worse than looking down at your bike and realizing that you have one less water bottle than you started with. Our cages are vigorously lab AND field tested at each stage of the development process to ensure that your water is safely held to the bike. Details: - Standard 65mm center-to-center hole spacing - Two mounting bolts included Dimensions: - Length 140mm/5.51in - Width 87mm/3.43in - Height 87mm/3.43 - Weight 45 Grams
Side loading for smaller frames This side-loading cage lets you easily access bottles from small spaces while you ride. It's suitable for road and MTB use and is the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Water bottle access from the left side when mounted on the downtube - Water bottle access from the right side when mounted on the seat tube - Suitable for road and mountain use - Use with the Right Side Load Cage for seat tube and downtube access on the same side of frame
Side loading for smaller frames This side-loading cage lets you easily access bottles from small spaces while you ride. It's suitable for road and MTB use and is the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Water bottle access from the right side when mounted on the downtube - Water bottle access from the left side when mounted on the seat tube - Suitable for road and mountain use - Use with the Left Side Load Cage for seat tube and downtube access on the same side of frame
Bontrager's Sideswipe Cage is perfect for smaller bike frames or unique full-suspension frames where water bottle clearance is an issue. It's got a reversible mount, so you can access your bottle from either the right of the left. It's light, holds securely and provides easy access to your bottle.
For those of us who need two hands to steer. - Fits a soda can - Attaches to most handlebars - Comes with a reversible graphic koozie (solid black inside) - Keeps your hands free and your drink cold
Lezyne's Alloy Cage is CNC-machined out of aluminum for impressive strength and durability. Its unique rib design holds bottles securely over rough roads and allows for easy in/out, plus the integrated pump mounts holds a Road Drive pump securely.
The Lucky Cat Cage is made from a single sheet of lightweight 5052 alloy. Cut in the shape of a Maneki-neko (Japanese for "beckoning cat"), this Portland Design Works bottle cage will undoubtedly bring good luck to its owner. Its side loading design makes it a great fit on small bike frames.
The perfect campfire complement The Trek 76 Camp Mug is perfect for fireside hot cocoa and trail-side coffee. It keeps your liquids hot and your hands toasty warm while you enjoy the great outdoors. Product details - 14 fl oz (414 mL) - Hand washing and drying is recommended
- Defend against frozen bottles this winter with the warmth-trapping power of our Scandi Purist Insulated bottle. - Purist technology prevents staining, mold, and bad taste in bottles - 23oz fluid capacity
Salsa Purist Insulated bottle features a Chromatek liner, a proprietary insulating barrier that lines the core to keep your liquids cold. - Squeezable materials allow for unmatched flexibility and comfort - Purist technology shields the inside of the bottle from any bad taste, mold, or staining
Small parts can be hard to keep up with. If you've lost pieces of the mounting hardware for your Speed Concept Water Bottle Cage, don't sweat it. You'll find all the replacement parts in this handy hardware kit. • Aluminum
$19.99 - $21.99
No matter what kind of fuel you sip to help you power your pedals, Electra's Linear Cup Holder will bring it along for the ride. It features a solid handlebar mount that's a breeze to install and classy, laser-etched anodized aluminum construction that firmly holds your beverage so you can use both hands to steer.
The Cannibal XC is a side entry fiberglass reinforced water bottle cage for situations where standard cages are difficult to use. -Works well with small and sloping frames
All-Around rotating bottle cage rotates to allow customization of bottle access. - Great for small or irregularly shaped frames. - Adjustable for custom positioning - Easy bottle access on small or irregularly shaped frames - Durable, lightweight aluminum - Easy to slide bottles in and out - Includes steel mounting bolts
You can now put a water bottle pretty much anywhere on your trike! The TerraTrike Bottle Pocket is a reinforced padded sleeve that easily attaches to your trike via a versatile and easy to use strapping system. For added touches the Bottle Pocket has a bottle retention cord so any size bottle will stay put and reflective stripping for added visibility. Attach to the Commuter or Expedition Panniers for increased versatility. - Accepts many bottle sizes and types - Strapping allows for attaching under the seat frame and in many different locations
Page 1 of 3 Next page