Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

TerraTrike 20-inch Deluxe Front Fender Set
$119.95
A must for wet weather conditions, these fenders protect from dirt and water splatter. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Compatible with all current TerraTrike models. Not compatible with TerraTrike versions 3.5 and older. - Deluxe front fender set for 20" (406) wheels - Robust design for years of reliable use - Set of two, contains mounting hardware and instructions - Black and silver fenders with black hardware
TerraTrike 20-inch Deluxe Rear Fender
$59.95
In foul weather conditions this rear fender protects you from dirt and water splatter and thus the ever common "trike stripe" up the back of your neck and head. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Pair with the front fenders for that completely splatter free ride. Compatible with all current TerraTrike models. Not compatible with TerraTrike versions 3.5 and older. - Deluxe rear fender set for 20" (406) wheel - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware
TerraTrike 24-inch Deluxe Front Fender Set
$139.95
Deluxe front fender set for 24" (507) wheels. - Robust design for years of reliable use - Set of two, contains all mounting hardware and instructions - Black and silver fenders with black hardware - Only works with 24" front wheels, tire size up to 2"
TerraTrike 24-inch Deluxe Rear Fender
$69.95
- Deluxe rear fender for 24" (507) wheels. - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware - Only works with 24" rear wheels, tire size up to 2" - Not applicable with Sportster Model
TerraTrike 24-inch Front Fender Set - Extended Width
$139.95
- Deluxe wide front fender set for 24" (507) wheels - Designed for use with the Rambler A.T. (1.95"-2.25" wide tires) - Robust design for years of reliable use - Set of two, contains mounting hardware and instructions - Flat black fenders with black hardware
TerraTrike 24-inch Rear Fender - Extended Width
$69.95
- Deluxe wide rear fender for 24" (507) wheels - Designed for use with the Rambler A.T. (1.95"-2.25" wide tires) - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Flat black fender with black hardware
TerraTrike 26-inch Deluxe Rear Fender
$69.95
In foul weather conditions this rear fender protects you from dirt and water splatter and thus the ever common "trike stripe" up the back of your neck and head. Pair this with the matching front fenders for a completely spray free ride. The Deluxe Fenders are solid and stable so you won't get annoying vibrations or tire rubs from wind or rough roads. The black coloring with gray stripe and rear mud spoiler adds to your trike's sporty look. Pair with the front fenders for a completely splatter free ride. Compatible with all current TerraTrike models equipped with a 26" rear wheel. Not compatible with TerraTrike versions 3.5 and older. - Deluxe rear fender for 26" (559) wheels - Robust design for years of reliable use - Contains one rear fender, mounting hardware and instructions - Black and silver fender with black hardware
SKS B42 Commuter II
$34.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SKS B53 Commuter II
$34.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SKS B53 For 20-inch Commuter II (Bluemel) Fender Set, For Recumbent / Folding Bike
$32.99
- SKS B53 for 20" Commuter II (Bluemel) Fender Set for Recumbent / Folding Bike. - Features stainless hardware and stainless 3.0mm stays. - Made in Germany.
SKS B65 Commuter II (Bluemel) Fender Set For 28-inch
$52.99
- SKS B65 Commuter II Fender Set for 28 - Famous Bluemel Full-Coverage Fender Set - Features stainless hardware and stainless 3.0mm stays - Front profile 680mm - Rear profile 1185mm - ASR security release system for the front wheel
SKS Fatboard Fender Set
$54.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.
SKS Mud-X
$9.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.
SKS Rubber Straps (Set Of 8)
$7.99
- Rubber straps - Fit Raceblade, Mud-x - Set of 8
SKS S-Board Front Fender
$23.99
- Smart clip-on front mudguard for road, cyclocross, hybrid, gravel bikes, etc. - Fits a maximum tyre width up to 38mm. - It is the ideal companion to our S-BLADE rear mudguard. - Its smart, double hinged quick release fitting system also fits aero forks. - Paintwork protection film for the frame is included.
SKS X-Blade 26/27.5-inch
$32.99
The X-Blade 26/27.5-inch is a high-quality 2-component fender for the rear wheel of mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 26-inch and 27.5-inch wheel compatible
SKS X-Blade 27.5+/29-inch
$32.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
SKS X-Board
$13.99
The X-Board is an innovative clip-on fender with rubber fasteners for downtube mounting. - Adjustable soft rubber cable-spacers, ideal to adapt on almost any tube profile - Robust rubber fasteners - Dual compound-softspoiler
SKS X-Long Spoiler
$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders. - Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models - Easily mounted by consumer with included hardware - Sold as Each
SKS X-Tra Dry
$19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
SKS X-Tra Dry XL
$21.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it's longer and fatter than the regular X-tra Dry so it works great with 29ers and fatter 700c tires. It's also a breeze to attach with its easy-to-adjust seatpost mounting strap.
Problem Solvers Fender Flute
$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
Portland Design Works Mud Shovel 6.5 Fat Front Fender
$17.99 - $18.99
Portland Design Works has given the original fat bike front fender a facelift! The Mud Shovel 6.5 Front Fender was designed specifically for fat bikes - they're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. Made of heavy-duty polymer, the Mud Shovel 6.5 Front Fender is super lightweight but sturdy enough to take years of bad weather abuse. The fender mounts to the downtube of your bike using adjustable rubber straps for a secure fit. - Front fender is 254mm wide and 622mm long (10" x 24.5") - Extra-long, wide design blocks snow, water and sand - Bracket keeps fender super stable and is easy to install - Built with lightweight, sturdy materials for durability
Portland Design Works Mud Shovel 6.5 Fat Rear Fender
$24.99
These clip-on fenders are designed specifically for fat bikes. They're extra-long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle
Portland Design Works Mud Shovel 6.5 Fork Mount Fat Fender
$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks
Portland Design Works Origami Clip-On Front Fender
$15.99 - $16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
Portland Design Works Origami Clip-On Rear Fender
$20.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
Portland Design Works Poncho Fenders
$69.00
Made of durable polycarbonate and featuring the highest quality hardware of any fenders in their class, Portland Design Works' Poncho Fenders keep you safe from spray from head to toe. They use thick 6mm stays for extra rigidity, sturdy rubber mudflaps for extra coverage, and front safety release tabs to ensure your wheels keep turning even if debris gets lodged between the fender and tire. The Road size Poncho Fenders will fit close clearance road bikes with 700x23 tires maximum or road bikes designed to take fenders with up to 700x25 tires. They are designed to fit under caliper brakes and forks, and include add-on mounts for bikes that lack eyelets. - 30 mm wide to fit 700x23 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 454 g (16 oz) - Lifetime PDWarranty The City size Poncho Fenders are designed for touring and CX bikes with 700x35 tires maximum. They come with all necessary hardware to mount to bikes with brazed on eyelets. - 45 mm wide to fit 700x35 tires maximum - Pre-installed stays and brackets for faster mounting - Weight: 567 g (20 oz) - City size installation manual (PDF) - Lifetime PDWarranty
Planet Bike Big Buck Fender
$29.99
Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires
Planet Bike Cascadia ALX Fenders
$89.99
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
Page 1 of 5 Next page